TensorNodeStart free trial
User manual

FEA Tool user manual

How to model, load, analyse and design structures in the TensorNode FEA Tool: every panel and tool, the methods behind each analysis with their equations, and the limits of each.

This manual describes the FEA Tool of TensorNode: the three-dimensional finite element workspace in which you build a model of frames, trusses, cables, slabs, walls and shells, load it, analyse it and pass the results to the design modules. It is written for practising structural engineers and assumes a working knowledge of structural analysis and of the design standards of your region.

Each chapter covers one part of the workflow. Chapters 1 to 4 explain the window and how a model is built. Chapters 5 to 10 cover the data of a model: materials, sections, supports, loads, combinations and the mesh. Chapters 11 and 12 describe every analysis type with the method it uses and its key equations. Chapters 13 and 14 cover the results and the design of members, slabs and walls. Chapters 15 and 16 cover scripting and the exchange of models with other programs. The last four chapters cover verification, the scope and limits of the tool, the messages of the model check, and a glossary with the notation.

The FEA Tool supports the work of a qualified engineer, who remains responsible for the model, the interpretation of the results and the design.

  1. Chapter 1

    Getting started

    The FEA Tool is the analysis workspace of TensorNode. It holds a three-dimensional model of nodes, frame members and areas, runs linear, second-order, dynamic and nonlinear analyses on it, and sends the member forces to the...

    1. 1.1 What the FEA Tool does
    2. 1.2 Opening the FEA Tool
    3. 1.3 A first model from a template
    4. 1.4 A first model by script
    5. 1.5 Saving and opening models
    6. 1.6 Where to go next
  2. Chapter 2

    The interface

    The FEA Tool window has five parts: the header bar across the top, the workspace panel on the left with one page per tab, the model view in the middle with the modelling toolbar beside it, the properties panel on the right,...

    1. 2.1 The window at a glance
    2. 2.2 Header bar
    3. 2.3 Workspace panel and tabs
    4. 2.4 Model view
    5. 2.5 Modelling toolbar
    6. 2.6 Properties panel
    7. 2.7 Tables in the bottom dock
    8. 2.8 Status bar and display units
    9. 2.9 Minimise, focus and panel sizes
    10. 2.10 Keyboard and mouse
  3. Chapter 3

    Coordinate systems and conventions

    Every input and result of the FEA Tool refers to one of three coordinate systems: the global system of the model, the local system of each frame member, and the local system of each area.

    1. 3.1 Global coordinate system
    2. 3.2 Local axes of frame members
    3. 3.3 Member internal forces
    4. 3.4 Local axes of areas
    5. 3.5 Area forces and stresses
    6. 3.6 Units in the analysis
  4. Chapter 4

    Modelling

    A model can be started from a template, drawn with the cursor, typed in tables, written as a script or imported from another program, and these routes can be mixed: a template can be edited with the drawing tools and extended...

    1. 4.1 Templates
    2. 4.2 Grid lines
    3. 4.3 Snaps and the working plane
    4. 4.4 Drawing nodes, frames and areas
    5. 4.5 Selecting
    6. 4.6 Editing
    7. 4.7 Roles and labels
    8. 4.8 The model check
  5. Chapter 5

    Materials

    A material gives the analysis its elastic constants, density and thermal expansion, and gives the design and the nonlinear analyses its strengths and stress-strain curve.

    1. 5.1 Material types and properties
    2. 5.2 The material library
    3. 5.3 Your own materials
    4. 5.4 Defaults and missing values
    5. 5.5 Nonlinear stress-strain curves
    6. 5.6 Hysteresis rules
  6. Chapter 6

    Sections

    A frame section gives a member its area, second moments of area, torsion constant, shear areas and shape; an area section gives an area its type and thickness.

    1. 6.1 Section properties used by the analysis
    2. 6.2 Section libraries
    3. 6.3 Sections from a name
    4. 6.4 Parametric frame sections
    5. 6.5 Section designer
    6. 6.6 Section drawing
    7. 6.7 Prestress
    8. 6.8 Auto-select lists
    9. 6.9 Area sections
  7. Chapter 7

    Supports, releases and modifiers

    This chapter covers how a model is held and connected: supports and springs at nodes, springs under areas, restraints along area edges, end releases and rigid end offsets of members, member types, property modifiers, extra...

    1. 7.1 Supports
    2. 7.2 Springs
    3. 7.3 Area springs and edge restraints
    4. 7.4 End releases
    5. 7.5 Rigid end offsets
    6. 7.6 Member types
    7. 7.7 Property modifiers
    8. 7.8 Node masses
    9. 7.9 Rigid floor diaphragms
  8. Chapter 8

    Loads

    Loads are grouped in load patterns (also called load cases): each pattern is one independent action, such as the dead load, the live load or wind from one direction, with a type that the combination generator uses to apply the...

    1. 8.1 Load patterns
    2. 8.2 Self weight
    3. 8.3 Joint loads
    4. 8.4 Member loads
    5. 8.5 Area loads
    6. 8.6 Joint patterns
    7. 8.7 Hydrostatic and wind loads on areas
    8. 8.8 How area loads reach the nodes
    9. 8.9 Temperature loads
    10. 8.10 Mass source
    11. 8.11 Automatic lateral loads
  9. Chapter 9

    Load combinations

    A load combination is a factored sum of load patterns. The FEA Tool accepts combinations you type, and generates the strength and serviceability combinations of AS/NZS 1170.0, ASCE/SEI 7-22, NBC 2020 and EN 1990 from the types...

    1. 9.1 How combinations are solved
    2. 9.2 Typed combinations
    3. 9.3 Generating combinations by code
    4. 9.4 AS/NZS 1170.0
    5. 9.5 ASCE/SEI 7-22
    6. 9.6 NBC 2020
    7. 9.7 EN 1990
    8. 9.8 Good practice
  10. Chapter 10

    Meshing

    The objects you draw are not always the elements the engine solves. A frame member may be cut into several elements, and every area is divided into shell, plate or membrane elements.

    1. 10.1 Frame members
    2. 10.2 Members meeting at intermediate joints
    3. 10.3 Area mesh
    4. 10.4 Frame-edge matching
    5. 10.5 Area elements
    6. 10.6 Node limit and mesh size
    7. 10.7 Choosing a mesh
  11. Chapter 11

    Static analysis

    This chapter describes the static analysis types: linear static, P-Delta, buckling, nonlinear static and pushover, with the frame element and the equation solver they share.

    1. 11.1 Running an analysis
    2. 11.2 The frame element and linear static analysis
    3. 11.3 The equation solver
    4. 11.4 P-Delta analysis
    5. 11.5 Buckling analysis
    6. 11.6 Plastic hinges and fibre elements
    7. 11.7 Nonlinear static analysis
    8. 11.8 Pushover analysis
  12. Chapter 12

    Dynamic and seismic analysis

    This chapter covers the analyses that need the mass of the structure: modal analysis by eigenvectors or Ritz vectors, the equivalent lateral force method, response spectrum analysis, the storey and irregularity checks, and...

    1. 12.1 Seismic and dynamic setup
    2. 12.2 Modal analysis
    3. 12.3 Ritz vectors
    4. 12.4 Equivalent lateral force
    5. 12.5 Response spectrum analysis
    6. 12.6 Storey checks
    7. 12.7 Time history analysis
    8. 12.8 Nonlinear time history
    9. 12.9 Design spectra and ground motions
  13. Chapter 13

    Results

    After a run, the Results tab, the model view, the properties panel and the bottom dock all show the results, linked to each other: a value picked in one place is found in the others.

    1. 13.1 The Results tab
    2. 13.2 Deformed shape
    3. 13.3 Force diagrams and reactions
    4. 13.4 The member force panel
    5. 13.5 Area results and contours
    6. 13.6 The legend
    7. 13.7 Tables
    8. 13.8 Results of dynamic and nonlinear analyses
    9. 13.9 Reading the results with care
  14. Chapter 14

    Design

    The FEA Tool does not hold its own member checks. It sends each member, with its design actions, to the TensorNode design module that covers it (Steel Member, Beam-Column, Steel Column, Tension Member, Flexure, Column...

    1. 14.1 The design workflow
    2. 14.2 How members are matched to modules
    3. 14.3 Design actions and moment gradient
    4. 14.4 Lateral restraint and effective length
    5. 14.5 The batch design table and design inputs
    6. 14.6 Section optimiser
    7. 14.7 Design Expert
    8. 14.8 Slab and wall design
    9. 14.9 Circular concrete columns
  15. Chapter 15

    Scripting and the AI model builder

    Everything you can do with the mouse can also be written as a script: build a model, load it, run any analysis, read the results and design the members.

    1. 15.1 The script console
    2. 15.2 Conventions of the tn interface
    3. 15.3 The tn functions
    4. 15.4 Examples
    5. 15.5 Scripts for existing plane-frame code
    6. 15.6 The AI model builder
  16. Chapter 16

    Import and export

    The FEA Tool reads models from BIM and analysis programs and writes them back with the design results, so it can sit between the architectural model, another analysis program and the design.

    1. 16.1 Opening and saving TensorNode models
    2. 16.2 Formats read
    3. 16.3 Mapping of sections, grades, codes and units
    4. 16.4 Formats written
    5. 16.5 Limits of the readers
  17. Chapter 17

    Verification

    The analysis engine of the FEA Tool is checked against problems whose answers are known independently of the engine.

    1. 17.1 How the reference values are obtained
    2. 17.2 What is covered
    3. 17.3 Sources
    4. 17.4 What verification does and does not show
  18. Chapter 18

    Scope and limits

    This chapter collects in one place the size limits of the FEA Tool, the assumptions of its analyses, and what it does not model.

    1. 18.1 Size limits
    2. 18.2 Assumptions of the analyses
    3. 18.3 What is not modelled
    4. 18.4 Limits of particular analyses
    5. 18.5 Limits of combinations and design
    6. 18.6 Responsibility
  19. Chapter 19

    Troubleshooting

    The FEA Tool checks a model before every run and explains, in plain words, anything that would stop the analysis or make its results meaningless.

    1. 19.1 Before the analysis: the model
    2. 19.2 Before the analysis: loads, mass and inputs
    3. 19.3 During the analysis
    4. 19.4 Messages that report, not stop
    5. 19.5 Results that run but look wrong
  20. Chapter 20

    Glossary and notation

    This chapter defines the terms used in the FEA Tool and in this manual, and lists the symbols of the equations with their units.

    1. 20.1 Terms
    2. 20.2 Notation