Design codes
The standards and editions TensorNode implements, by type of element. The lists come from the modules themselves, so a standard appears here only when a module in the app uses it. Standards are not included with the software; clause numbers are cited in the reports.
- Steel frame members
- Cold-formed steel
- Concrete frame members
- Concrete slabs, walls and shells
- Prestressed concrete
- Timber
- Aluminium
- Masonry
- Connections
- Foundations and retaining structures
- Loads and combinations
- Composite, fire and other
Steel frame members
Beams, columns, beam-columns, tension and compression members, portal frames and crane beams.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS 4100:2020 | 16 | Beam-Column, Compression Strut, Crane Beam, Floor Beam, Load Stiffener, Mullion and 10 more |
| AS/NZ | AS 1418.18 | 1 | Crane Beam |
| AS/NZ | AS 3700:2018 | 1 | T / Angle Lintel |
| US | ANSI/AISC 360-22 | 16 | Beam-Column, Compression Strut, Crane Beam, Floor Beam, Load Stiffener, Mullion and 10 more |
| US | AISC DG 7 | 1 | Crane Beam |
| US | ASCE/SEI 7-22 | 1 | Crane Beam |
| CA | CSA S16-19 | 16 | Beam-Column, Compression Strut, Crane Beam, Floor Beam, Load Stiffener, Mullion and 10 more |
| CA | NBC 2020 | 1 | Crane Beam |
| EU | EN 1993-1-1:2005+A1:2014 | 16 | Beam-Column, Compression Strut, Crane Beam, Floor Beam, Load Stiffener, Mullion and 10 more |
| EU | EN 1990:2002+A1:2005 | 12 | Beam-Column, Compression Strut, Floor Beam, Load Stiffener, Mullion, Portal Frame and 6 more |
| EU | EN 1993-1-8:2005 | 3 | PFC & Plate, Shelf Angle, Tension Member |
| EU | EN 1993-1-5:2006 | 2 | Load Stiffener, Web Bearing |
| EU | EN 1991-1-4:2005+A1:2010 | 1 | Mullion |
| EU | EN 1991-3:2006 | 1 | Crane Beam |
| EU | EN 1993-1-9:2005 | 1 | Crane Beam |
| EU | EN 1993-6:2007 | 1 | Crane Beam |
| EU | EN 1996-1-1:2005+A1:2012 | 1 | T / Angle Lintel |
Cold-formed steel
No design module yet. Section properties and frame analysis work with any section you define in the FEA Tool.
Concrete frame members
Flexure, shear, torsion, columns, development and laps, crack control, durability and cover.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS 3600:2018 | 13 | Beam Shear, Beam Torsion, Column Biaxial, Column Interaction, Concrete Durability and Cover, Corbel / Bracket and 7 more |
| US | ACI CODE-318-25 | 13 | Beam Shear, Beam Torsion, Column Biaxial, Column Interaction, Concrete Durability and Cover, Corbel / Bracket and 7 more |
| US | ACI CODE-318-19 | 1 | FRP Flexural Strengthening |
| US | ACI PRC-440.2-17 | 1 | FRP Flexural Strengthening |
| CA | CSA A23.3-19 | 12 | Beam Shear, Beam Torsion, Column Biaxial, Column Interaction, Corbel / Bracket, Crack Control and 6 more |
| CA | CSA A23.1-19 | 1 | Concrete Durability and Cover |
| CA | CSA G30.18 | 1 | Reinforcement Table |
| EU | EN 1992-1-1:2004+A1:2014 | 13 | Beam Shear, Beam Torsion, Column Biaxial, Column Interaction, Concrete Durability and Cover, Corbel / Bracket and 7 more |
| EU | EN 10080 | 1 | Reinforcement Table |
Concrete slabs, walls and shells
One-way, two-way and flat slabs, punching shear, walls, stairs and ground slabs. Plates and shells are analysed in the FEA Tool.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS 3600:2018 | 7 | Concrete Wall, Flat Slab, Industrial Slab, One-Way Slab, Punching Shear, Stair and 1 more |
| AS/NZ | AS 2870:2011 | 1 | Residential Slab |
| US | ACI CODE-318-25 | 8 | Concrete Wall, Flat Slab, Industrial Slab, One-Way Slab, Punching Shear, Residential Slab and 2 more |
| US | ACI 360R-10 | 1 | Industrial Slab |
| US | IBC 2018 | 1 | Residential Slab |
| US | IRC 2018 | 1 | Residential Slab |
| CA | CSA A23.3-19 | 8 | Concrete Wall, Flat Slab, Industrial Slab, One-Way Slab, Punching Shear, Residential Slab and 2 more |
| CA | CSA A23.1-19 | 1 | Residential Slab |
| CA | NBC 2020 | 1 | Residential Slab |
| EU | EN 1992-1-1:2004+A1:2014 | 8 | Concrete Wall, Flat Slab, Industrial Slab, One-Way Slab, Punching Shear, Residential Slab and 2 more |
| EU | Concrete Society TR34 | 1 | Industrial Slab |
| EU | EN 1990:2002+A1:2005 | 1 | Residential Slab |
| EU | EN 1997-1:2004+A1:2013 | 1 | Residential Slab |
Prestressed concrete
No design module yet. The material library holds 3 prestressing tendon grades and the section designer takes them in a fibre analysis.
Timber
Members, floor and roof beams, columns, joints and span tables.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS 1720.1:2010 | 7 | Circular Column, F17 Span Tables, Joint, Timber Column, Timber Floor Beam, Timber Member and 1 more |
| US | ANSI/AWC NDS-2018 | 7 | Circular Column, F17 Span Tables, Joint, Timber Column, Timber Floor Beam, Timber Member and 1 more |
| US | IRC 2018 | 1 | F17 Span Tables |
| CA | CSA O86-19 | 7 | Circular Column, F17 Span Tables, Joint, Timber Column, Timber Floor Beam, Timber Member and 1 more |
| CA | NBC 2020 | 1 | F17 Span Tables |
| EU | EN 1995-1-1:2004+A2:2014 | 7 | Circular Column, F17 Span Tables, Joint, Timber Column, Timber Floor Beam, Timber Member and 1 more |
| EU | EN 1990:2002+A1:2005 | 6 | Circular Column, F17 Span Tables, Timber Column, Timber Floor Beam, Timber Member, Timber Roof Beam |
Aluminium
No design module yet. The material library holds 4 aluminium alloys for analysis in the FEA Tool.
Masonry
Masonry members, piers and bond beams.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS 3700:2018 | 3 | Bondbeam, Masonry Member, Masonry Pier |
| US | TMS 402-22 | 3 | Bondbeam, Masonry Member, Masonry Pier |
| CA | CSA S304-14 | 3 | Bondbeam, Masonry Member, Masonry Pier |
| EU | EN 1996-1-1:2005+A1:2012 | 3 | Bondbeam, Masonry Member, Masonry Pier |
Connections
Bolts, welds, plates, base plates, anchors, pins and portal knees.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS 4100:2020 | 12 | Base Plate, Bolt Group, Bolt Tension, Bolts, Cleat Plate, Eccentric Bolt Group and 6 more |
| AS/NZ | AS 3600:2018 | 1 | Base Plate |
| AS/NZ | AS 5216:2021 | 1 | Anchor Bolt |
| US | ANSI/AISC 360-22 | 12 | Base Plate, Bolt Group, Bolt Tension, Bolts, Cleat Plate, Eccentric Bolt Group and 6 more |
| US | ACI CODE-318-25 | 1 | Anchor Bolt |
| US | AISC DG 1 (2nd ed.) | 1 | Base Plate |
| CA | CSA S16-19 | 12 | Base Plate, Bolt Group, Bolt Tension, Bolts, Cleat Plate, Eccentric Bolt Group and 6 more |
| CA | CSA A23.3-19 | 2 | Anchor Bolt, Base Plate |
| EU | EN 1993-1-8:2005 | 11 | Base Plate, Bolt Group, Bolt Tension, Bolts, Cleat Plate, Eccentric Bolt Group and 5 more |
| EU | EN 1993-1-1:2005+A1:2014 | 2 | Portal Knee, Taper Haunch |
| EU | EN 1992-1-1:2004+A1:2014 | 1 | Base Plate |
| EU | EN 1992-4:2018 | 1 | Anchor Bolt |
Foundations and retaining structures
Pad, strip, combined and eccentric footings, bored piers, piered beams, retaining and basement walls, residential slabs.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS 3600:2018 | 7 | Basement Wall, Combined Footing, Eccentric Pad, Pad Foundation, Piered Beam, Retaining Wall and 1 more |
| AS/NZ | AS 2159:2009 | 4 | Bored Pier, Eccentric Pad, Pad Foundation, Tree Effects: Piers |
| AS/NZ | AS 4678:2002 | 3 | Earth Pressure, Retaining Wall, Sleeper Wall |
| AS/NZ | AS 2870:2011 | 2 | Tree Effects: Piers, Tree Effects: y_s |
| US | ACI CODE-318-25 | 8 | Basement Wall, Bored Pier, Combined Footing, Eccentric Pad, Pad Foundation, Piered Beam and 2 more |
| US | IBC 2018 | 3 | Bored Pier, Post Footing, Sleeper Wall |
| US | ANSI/AISC 360-22 | 1 | Sleeper Wall |
| US | ANSI/AWC NDS-2018 | 1 | Sleeper Wall |
| US | ASCE/SEI 7-22 | 1 | Earth Pressure |
| CA | CSA A23.3-19 | 8 | Basement Wall, Bored Pier, Combined Footing, Eccentric Pad, Pad Foundation, Piered Beam and 2 more |
| CA | NBC 2020 | 4 | Bored Pier, Earth Pressure, Post Footing, Sleeper Wall |
| CA | CSA O86-19 | 1 | Sleeper Wall |
| CA | CSA S16-19 | 1 | Sleeper Wall |
| EU | EN 1997-1:2004+A1:2013 | 11 | Basement Wall, Bored Pier, Combined Footing, Earth Pressure, Eccentric Pad, Pad Foundation and 5 more |
| EU | EN 1992-1-1:2004+A1:2014 | 8 | Basement Wall, Bored Pier, Combined Footing, Eccentric Pad, Pad Foundation, Piered Beam and 2 more |
| EU | EN 1990:2002+A1:2005 | 6 | Bored Pier, Combined Footing, Eccentric Pad, Pad Foundation, Piered Beam, Strip Footing |
| EU | EN 1993-1-1:2005+A1:2014 | 1 | Sleeper Wall |
| EU | EN 1995-1-1:2004+A2:2014 | 1 | Sleeper Wall |
Loads and combinations
Wind, snow, earthquake, dead and live loads, and the load combinations of the FEA Tool.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS/NZS 1170.2:2021 | 6 | Flag, Free Roof / Canopy, Hoarding, Monoslope Roof, Terrain Change, Wind Actions |
| AS/NZ | AS 1170.4:2007 | 2 | Earthquake Design Category, Static Analysis |
| AS/NZ | AS 4100:2020 | 1 | Purlin & Girt Loads |
| AS/NZ | AS/NZS 1170.1:2002 | 1 | Dead & Live Loads |
| AS/NZ | AS/NZS 1170.3:2003 | 1 | Snow Loads |
| US | ASCE/SEI 7-22 | 11 | Dead & Live Loads, Earthquake Design Category, Flag, Free Roof / Canopy, Hoarding, Monoslope Roof and 5 more |
| US | ANSI/AISC 360-22 | 1 | Purlin & Girt Loads |
| CA | NBC 2020 | 11 | Dead & Live Loads, Earthquake Design Category, Flag, Free Roof / Canopy, Hoarding, Monoslope Roof and 5 more |
| CA | CSA S16-19 | 1 | Purlin & Girt Loads |
| EU | EN 1991-1-4:2005+A1:2010 | 7 | Flag, Free Roof / Canopy, Hoarding, Monoslope Roof, Purlin & Girt Loads, Terrain Change and 1 more |
| EU | EN 1998-1:2004+A1:2013 | 2 | Earthquake Design Category, Static Analysis |
| EU | EN 1990:2002+A1:2005 | 1 | Dead & Live Loads |
| EU | EN 1991-1-3:2003+A1:2015 | 1 | Snow Loads |
| EU | EN 1993-1-1:2005+A1:2014 | 1 | Purlin & Girt Loads |
| AS/NZ | AS/NZS 1170.0:2002 | FEA | Strength and serviceability combinations in the FEA Tool |
| US | ASCE/SEI 7-22 | FEA | Strength and allowable stress combinations in the FEA Tool |
| CA | NBC 2020 | FEA | Ultimate and serviceability limit states combinations in the FEA Tool |
| EU | EN 1990:2002+A1:2005 | FEA | Persistent, seismic and serviceability combinations in the FEA Tool |
Composite, fire and other
Composite members, fire design of steel and timber, drainage and stormwater, section properties and unit tools.
| Region | Standard and edition | Modules | Used by |
|---|---|---|---|
| AS/NZ | AS/NZS 3500.3 | 3 | Drainage, Rainfall Intensity (AEP), Rainfall Intensity (ARI) |
| AS/NZ | ARR 2019 | 1 | Rainfall Intensity (AEP) |
| AS/NZ | AS 1720.4:2019 | 1 | Timber Member in Fire |
| AS/NZ | AS 2327:2017 | 1 | Composite Member |
| AS/NZ | AS 4100:2020 | 1 | Steel Member in Fire |
| AS/NZ | AS/NZS 3500 | 1 | Stormwater Detention |
| AS/NZ | AS/NZS 3679.1 | 1 | Section Properties |
| US | ASCE/SEI 7-22 | 3 | Drainage, Rainfall Intensity (AEP), Rainfall Intensity (ARI) |
| US | IPC 2018 | 3 | Drainage, Rainfall Intensity (AEP), Rainfall Intensity (ARI) |
| US | ANSI/AISC 360-22 | 2 | Composite Member, Steel Member in Fire |
| US | NOAA Atlas 14 | 2 | Rainfall Intensity (AEP), Rainfall Intensity (ARI) |
| US | ANSI/AWC NDS-2018 | 1 | Timber Member in Fire |
| CA | NBC 2020 | 3 | Drainage, Rainfall Intensity (AEP), Rainfall Intensity (ARI) |
| CA | NPC 2020 | 3 | Drainage, Rainfall Intensity (AEP), Rainfall Intensity (ARI) |
| CA | CSA S16-19 | 2 | Composite Member, Steel Member in Fire |
| CA | CSA O86-19 | 1 | Timber Member in Fire |
| EU | EN 752 | 4 | Drainage, Rainfall Intensity (AEP), Rainfall Intensity (ARI), Stormwater Detention |
| EU | EN 12056-3 | 3 | Drainage, Rainfall Intensity (AEP), Rainfall Intensity (ARI) |
| EU | EN 1990:2002+A1:2005 | 1 | Composite Member |
| EU | EN 1993-1-1:2005+A1:2014 | 1 | Composite Member |
| EU | EN 1993-1-2:2005 | 1 | Steel Member in Fire |
| EU | EN 1994-1-1:2004 | 1 | Composite Member |
| EU | EN 1995-1-2:2004 | 1 | Timber Member in Fire |
63 standards and editions across 96 modules. The list is read from the app at build time.