TensorNodeOpen TensorNode
Home / Terms of use

Terms of use

The terms of use and software licence of TensorNode (ABN 14 612 486 679). They are shown when you create an account and the first time you use the software.

Terms of use and licence (version 2.1)

1. Parties and acceptance

These terms are a legal agreement between you and TensorNode (ABN 14 612 486 679) ("we", "us", "our"), the supplier of TensorNode. You can reach us through the Support page of this site or the Support button in the app.

1.1 You accept these terms when you create an account, start a subscription, open the evaluation copy or otherwise use TensorNode, whichever happens first. If you accept for an employer or other organisation, you confirm that you are authorised to bind it, and "you" then includes that organisation and each person it allows to use TensorNode.

1.2 If you do not accept these terms, do not use TensorNode.

2. Definitions

In these terms: "Software" means TensorNode, including the web application, calculation, analysis and reporting tools, any server components, data, documentation and every update; "Output" means any calculation, result, check, diagram, table, report, certificate, export or other material produced by the Software; "Standard" means any design code, standard, specification, regulation or guidance document, in any edition, that a module refers to; "Plan" means the subscription tier, seat count, feature scope and term that you purchased or were granted; "Seat" means one named individual who may use the Software under a Plan; "Qualified Engineer" means a natural person who is a professional structural or civil engineer with the education, experience, registration and insurance that the law of the place of the project requires for the design work concerned (for example RPEQ, CPEng/NER, PE, P.Eng. or Chartered Engineer status, as applicable); "Project" means the structure, works or other matter for which you use the Software; "Fees" means the amounts payable for a Plan; and "Intellectual Property Rights" means copyright, patents, trade marks, designs, trade secrets, database rights, moral rights and all similar rights anywhere in the world.

Headings are for convenience only. "Including" does not limit what comes before it. A reference to a law includes that law as amended or replaced.

3. Licence grant

3.1 Subject to these terms and payment of the Fees, we grant you a limited, revocable, non-exclusive, non-transferable, non-sublicensable licence, for the term of your Plan, to access and use the Software for your own internal professional engineering work, within the tier, features, Seat count and other limits of your Plan.

3.2 The licence is per Seat. A Seat is for one named individual and may not be shared, pooled, rotated or used by more than one person, including through shared logins, shared sessions or automated access. A Plan with several Seats allows only the number of Seats stated in the Plan, and the tiers (for example Essential, Professional and Studio) differ in the features and limits they include.

3.3 Features differ between tiers. A feature that is not part of your Plan is not licensed to you, even if it is technically reachable. We may change which features belong to a tier for future terms, but we will not remove a feature from a Plan during a paid term unless it is replaced by one that does the same job or you may cancel under clause 17 or 19.

3.4 The free evaluation copy is licensed for assessing the Software only. It is not for use on live Projects, may be limited or withdrawn at any time, and carries no support commitment.

3.5 We keep all rights that are not expressly granted. Nothing in these terms transfers any Intellectual Property Rights in the Software to you.

4. Restrictions

Except where a law that cannot be excluded gives you the right, you must not, and must not allow anyone else to:

  • copy, modify, translate, adapt, decompile, disassemble, reverse engineer or try to derive the source code, algorithms, equations, data or structure of the Software or any server component;
  • use any automated means, such as a script, bot, crawler, macro or scraper, to extract, harvest or bulk-copy Output, data or other content, or to access any part of the Software other than through its own interface;
  • use the Software, Output or anything learned from them to build, train, benchmark for publication or improve a product or service that competes with the Software, or to train or test a machine-learning model;
  • share, resell, rent, lease, lend, host, sublicense or make the Software available to a third party, or share an account, password or Seat;
  • circumvent, disable or interfere with any licence check, usage limit, watermark, certificate, access control, copy protection or security feature, or probe or test the vulnerability of any system we operate;
  • remove or alter any notice of ownership, report certificate, verification record, version stamp or licence text;
  • use the Software in breach of any law, or to infringe the rights of another person.

5. What the Software is, and what it is not

5.1 The Software is a calculation aid for people trained in structural engineering. It carries out the calculations that its reports describe, shows the working, and cites the clause of the Standard each step follows. It is not an engineer, does not provide engineering, design, checking, certification or advisory services, and does not replace the judgement of a Qualified Engineer.

5.2 We do not know your Project. The Software does not check that your inputs describe the real structure, that the loads you chose are complete, that your model is a fair idealisation, that a design is buildable, or that a result suits your purpose.

5.3 A report certificate, input hash or verification record shows only that the printed results follow from the printed inputs in the named version of the Software. It is not a signature, an approval, a statement of correctness or evidence that the inputs or the design are suitable.

5.4 Any published information about how the Software is tested describes what was tested at the time. It is not a promise that every input combination gives a correct result.

6. Professional responsibility

6.1 You must have every Output, and every input and assumption behind it, independently checked and approved by a Qualified Engineer before it is relied on for design, documentation, approval, procurement, fabrication, construction, assessment, certification or any other purpose. That engineer is solely responsible for the design, its inputs, its use and every decision made from it. If you are not a Qualified Engineer, you must not use the Software for a Project without one.

6.2 You must not rely on the Software, or on any statement by us about it, in place of your own professional skill and judgement. You acknowledge that you have not relied on any representation by us about accuracy, completeness, suitability or fitness for a particular Project, other than those set out in these terms.

6.3 You are solely responsible for:

  • the inputs you enter and the data you import, including units, geometry, material properties, section choices, soil and site data;
  • selecting the Standard, edition, amendment, design code path and, where a module offers it, the national annex or national parameter set that applies to your Project and place, and confirming that the Software's coded edition is the one that applies;
  • the idealisation of the structure, including supports, connections, member lengths, effective lengths, stiffness, boundary conditions, mesh, analysis type and any simplifying assumptions;
  • the load assumptions, load combinations, load paths and actions, including those that the Software does not generate;
  • reading the assumptions, limits and notes printed in each module and report, and verifying the Output by independent means, such as hand calculation, a second program or a physical check, to the standard of your profession;
  • compliance with the building laws, contracts, licensing and professional obligations that apply to you and your Project; and
  • keeping your own records, backups and copies of inputs and reports.

6.4 You are responsible for every person who uses the Software under your account or on your behalf, and for their acts and omissions.

7. Standards are not included

7.1 The Software paraphrases and applies published Standards. It does not reproduce the text of any standard, and it does not replace one. You must hold your own current copy of each Standard you rely on, obtained from its publisher (for example Standards Australia, ACI, AISC, ASCE, CSA, CEN and its national members, or BSI), and must read the clauses concerned.

7.2 Standards are amended, corrected and replaced, and national authorities add requirements. The Software states the edition each module is coded to. It is your job to confirm that this is the edition that applies to your Project, and that it has not been superseded, amended or varied by a regulator, contract or authority.

7.3 Where the Software and a Standard differ, the Standard governs. Clause references in Output are a navigation aid and may be incomplete or out of date.

8. No warranties

8.1 To the full extent permitted by law, the Software and all Output are provided "as is" and "as available". We give no warranty of compliance with any Standard, building regulation, contract or law, and no other warranty, condition, guarantee or representation, express or implied, statutory or otherwise, including any warranty of accuracy, completeness, reliability, availability, uninterrupted or error-free operation, merchantability, satisfactory quality, fitness for a particular purpose, title or non-infringement.

8.2 We do not warrant that errors will be corrected, that the Software is free of defects or harmful code, or that it will work with your devices, browsers, models or third-party software. Interchange with other programs (for example by file import and export) depends on those programs and on file formats we do not control.

8.3 NOTICE TO USERS IN THE UNITED STATES: TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE AND ALL OUTPUT ARE PROVIDED "AS IS" AND "AS AVAILABLE" WITHOUT WARRANTY OF ANY KIND. WE DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY AND NON-INFRINGEMENT. THE SOFTWARE IS NOT A SUBSTITUTE FOR THE INDEPENDENT REVIEW AND SEAL OF A LICENSED PROFESSIONAL ENGINEER. NO ADVICE OR INFORMATION GIVEN BY US CREATES ANY WARRANTY.

9. Australian Consumer Law and rights that cannot be excluded

9.1 Nothing in these terms excludes, restricts or modifies any guarantee, right or remedy that you have under the Australian Consumer Law (Schedule 2 of the Competition and Consumer Act 2010 (Cth)) or any other law that cannot lawfully be excluded, restricted or modified (a "Non-excludable Right").

9.2 Where a Non-excludable Right applies and the law allows us to limit our liability for a breach of it, our liability for that breach is limited, at our choice, to one or more of: supplying the Software or the service again, or paying the cost of having the Software or the service supplied again.

9.3 Our goods and services come with guarantees that cannot be excluded under the Australian Consumer Law. For a major failure with the service, you are entitled to cancel your service contract with us and to a refund for the unused portion, or to compensation for its reduced value. You are also entitled to be compensated for any other reasonably foreseeable loss or damage.

9.4 If you acquire the Software as a consumer within the meaning of the Australian Consumer Law, the limits in these terms apply only to the extent that the law allows. If you are a small business, these terms are a standard form contract for the purposes of Part 2-3 of the Australian Consumer Law, as amended with effect from November 2023. The limits and exclusions in these terms are included only because they are reasonably necessary to protect our legitimate interests: the Software is priced as a low-cost calculation aid, we cannot see or control your inputs, your Projects or your checking, and the losses that can follow from structural work are out of all proportion to the Fees. We will not rely on a term to the extent that a court declares it unfair, and clause 28 then applies.

10. Exclusion of indirect and consequential loss

10.1 Subject to clause 9, and to the full extent permitted by law, we are not liable to you or to anyone claiming through you, whether in contract, tort (including negligence), under statute, in equity or otherwise, for any indirect, consequential, special, incidental, exemplary or punitive loss or damage, or for any of the following, whether direct or indirect: loss of profit, revenue, business, contracts, goodwill or anticipated savings; loss or corruption of data; the cost of rework, redesign, remediation, demolition, strengthening, delay, disruption, re-inspection or replacement of any structure or part of it; liability to your clients or other third parties; or professional indemnity excess or premium increases.

10.2 Clause 10.1 applies even if we knew or should have known that such loss was possible, and including loss that arises because an Output was used without independent checking by a Qualified Engineer.

11. Limit of liability

11.1 Subject to clause 9, and to the full extent permitted by law, our total aggregate liability to you for all claims, losses and damages arising out of or in connection with these terms, the Software or any Output, whether in contract, tort (including negligence), under statute or otherwise, is limited to the fees you paid us for the Software in the 12 months before the event that first gave rise to the claim. For the free evaluation copy, that amount is nil.

11.2 The cap in clause 11.1 is a single aggregate cap for all claims together. It is not renewed by the number of claims, Projects, Seats, users or Outputs. Claims connected with the same cause are treated as one claim.

11.3 Any claim against us must be notified in writing within 12 months after you became aware, or ought reasonably to have become aware, of the facts giving rise to it, to the extent the law allows a shorter period than the one that would otherwise apply.

11.4 You agree that the Fees reflect this allocation of risk, and that you can insure against the risks of your professional work in a way that we cannot.

11.5 Nothing in these terms limits liability for fraud, for wilful misconduct, or for any liability that cannot be limited by law.

12. Indemnity

12.1 To the full extent permitted by law, you indemnify us, and keep us indemnified, against all claims, demands, proceedings, losses, damages, liabilities, costs and expenses (including reasonable legal costs on a full indemnity basis) brought by or owed to a third party, including your clients, employers, co-consultants, contractors, owners, occupiers, insurers and regulators, to the extent that they arise out of or are connected with: (a) any design, specification, drawing, advice, report or other work product that you produce or contribute to, in whole or in part, using or relying on the Software or any Output; (b) the inputs you provide, your choice of Standard, edition and national annex, your idealisation and your load assumptions; (c) your use of the Software, or use of it under your account, in breach of these terms or of any law; or (d) a claim that material you supply to the Software infringes the rights of another person.

12.2 You are not required to indemnify us to the extent that the loss was caused by our own breach of these terms or our negligence, to the extent the law does not allow the indemnity to apply.

12.3 We will tell you promptly of a claim that you may have to indemnify, let you take over its defence with reasonable help from us at your cost, and not settle it without your agreement, which you must not unreasonably withhold. Our failure to tell you promptly reduces your obligation only to the extent that it causes you loss.

13. Intellectual property and your content

13.1 The Software, its code, equations, data, text, tables, drawings, user interface, marks and documentation belong to us or our licensors and are protected by law. The name TensorNode, its logo and its wordmark are our marks; you may not use them except to identify the Software truthfully.

13.2 You keep ownership of the inputs you enter and the reports you produce. You grant us a licence to process them as needed to provide the Software, support you and keep the service secure. We do not use your inputs to train models. If you send us feedback, you give us a perpetual, worldwide, royalty-free right to use it without obligation to you.

13.3 Data and summaries in the Software are compiled or paraphrased from published sources for use inside the Software. You gain no right in the underlying Standards or in third-party data, which remain the property of their owners.

13.4 The Software includes open-source components under their own licences, listed under Open-source notices. Those licences apply to those components and nothing in these terms limits them.

14. Data and privacy

The Privacy notice explains what the Software keeps on your device and what we keep for accounts, and forms part of these terms by reference. We handle personal information in line with the Privacy Act 1988 (Cth) and, where they apply to you, other privacy laws. We do not keep the inputs or results of your calculations. You are responsible for the data you put into the Software and for having the right to do so.

15. Availability, support and updates

We aim to keep the hosted service available but do not promise any level of availability, speed or support response time. We may change, update, suspend or discontinue features, content, versions, interfaces or the service, and may do maintenance without notice. Support is given through the Support option in the Software, on a reasonable-endeavours basis.

16. Fees, tax and renewal

16.1 Fees are shown before you subscribe, in the currency shown, and exclude GST and other taxes unless stated. You must pay them, plus any such tax, in advance for each period. Payments are processed by a third-party payment processor, and we do not store card details.

16.2 Unless your Plan says otherwise, a Plan renews automatically for the same period at the then-current Fees until you cancel. We will tell you of a Fee change at least 30 days before it applies to you, and it will apply from your next renewal.

16.3 If a payment fails, we may suspend access until it is paid. Fees are not set off against any claim.

17. Cancellation and refunds

17.1 You can cancel at any time in the account area or through support. Cancellation takes effect at the end of the period you have paid for, and access continues until then.

17.2 Fees already paid are not refundable, and we do not refund part periods, except where these terms say so, where we agree in writing, or where the law (including the Australian Consumer Law) requires it. Nothing in this clause limits a Non-excludable Right.

18. Suspension and termination

18.1 We may suspend or restrict access, immediately and without refund except as clause 17 allows, if we reasonably believe that you have breached these terms (including clauses 3, 4 and 22), that an account is shared, that use creates a security or legal risk, or that a payment is overdue.

18.2 We may terminate your licence by written notice if you commit a breach and do not fix it within 14 days of notice (or immediately if it cannot be fixed), if you become insolvent, or if we stop offering the Software, in which case we will refund the Fees for the unused part of the paid term.

18.3 On termination or expiry your licence ends and you must stop using the Software. You should save your reports and inputs before that happens, because we are not obliged to keep them. Clauses that by their nature survive, including 4, 6, 8 to 13, 21, 22 and 24 to 29, continue to apply.

19. Changes to these terms

We may update these terms from time to time to reflect changes in the Software, the law or our practices. We will give you at least 30 days' notice of a significant change, in the Software or by email, before it applies to you. If you do not agree to the change, you may cancel before it takes effect and we will refund the Fees for the unused part of the paid term. Using the Software after the change takes effect is acceptance of it.

20. Force majeure

We are not liable for a delay, failure or interruption caused by an event beyond our reasonable control, including natural disaster, fire, flood, storm, pandemic, war, terrorism, civil unrest, government action, power, network, cloud, hosting or internet failure, failure of a third-party provider, or cyber-attack. Our obligations are suspended for as long as the event continues.

21. Export controls and sanctions

You must not use, export, re-export or transfer the Software in breach of the export control and sanctions laws of Australia, the United States, the United Kingdom, the European Union or any other law that applies. You confirm that you are not on a sanctions list and are not located in, or controlled from, an embargoed country.

22. Compliance and audit

You must keep your account details accurate and your credentials secure, and tell us promptly of any unauthorised use. We may, on reasonable notice and no more than once a year unless we suspect a breach, ask you to confirm in writing that your use is within your Plan, and may monitor usage data to enforce Seat and feature limits.

23. Assignment

You may not assign, novate or transfer any right or obligation under these terms without our written consent. We may assign or novate our rights and obligations, including to a company or other person that takes over the Software, on notice to you.

24. Notices

We may give you notice in the Software, by email to your account address, or by posting it on our site. You may give us notice through the Support option in the Software. A notice is received when it is sent, unless the sender receives a delivery failure.

25. Governing law and courts

25.1 These terms are governed by the laws of Western Australia, Australia. You and we submit to the exclusive jurisdiction of the courts of that state and the courts that may hear appeals from them, except where the law gives you the right to bring proceedings elsewhere.

25.2 The United Nations Convention on Contracts for the International Sale of Goods does not apply.

25.3 If you use the Software outside Australia, the same exclusions and limits apply to the extent that the law of your place of residence allows. Mandatory consumer-protection rights of your country that cannot be excluded by agreement continue to apply to you.

25.4 For users in the United States: the disclaimers of warranty and limits of liability in these terms are conspicuous and are a basic part of the bargain between us. Some states do not allow certain exclusions, so some of them may not apply to you.

25.5 For users in Canada: these terms are written in English at your request. The parties have expressly required that this agreement and all related documents be drawn up in English. If you are a consumer resident in Quebec, nothing in these terms removes a right given to consumers by the Consumer Protection Act (Quebec) or the Civil Code of Quebec, including any limit on the exclusion of liability for your own acts, and any term that conflicts with a mandatory provision of that law does not apply to you.

26. Entire agreement

These terms, the Privacy notice, the Plan you chose and any order or checkout page you accepted are the entire agreement between you and us about the Software, and replace all earlier discussions, proposals and understandings. You have not relied on any statement that is not in them. Any terms you put forward, such as in a purchase order, do not apply.

27. Waiver and relationship

A failure or delay in exercising a right is not a waiver of it. We are independent contractors to each other, with no partnership, agency, employment or fiduciary relationship. Nothing in these terms gives a right to a person who is not a party, other than our licensors, who may rely on the disclaimers and limits in them.

28. Severability

If a court finds a term, or part of a term, void, unenforceable or unfair, that term or part is read down to the extent needed to make it enforceable, or otherwise removed, and the rest of these terms continues in effect. A limit or exclusion that cannot apply to one kind of claim, one person or one place still applies to every other.

29. Contact and review

Questions about these terms can be sent through the Support option in the Software. Please read these terms in full and take legal advice if you are unsure of them. These terms are version 2.1.

Business: TensorNode, ABN 14 612 486 679. Related: Privacy policy, Scope and limits, Third-party notices.