Structural analysis software for 3D frames, plates and shells
TensorNode brings a 3D finite element tool and 96 code-checking modules into one workspace. Model once, analyse in the way the job needs, then send the member forces straight to the design modules, for Australian, US, Canadian and European standards.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
Analysis types
The FEA Tool lists twelve analysis types. Pick one, set its parameters and run it. The model is checked first, and if something is missing the tool says what.
| Analysis | Purpose | Method in the manual |
|---|---|---|
| Linear static | first-order analysis of the load patterns and combinations | Static analysis |
| P-Delta | second-order analysis: axial loads act on the deflected shape (iterated) | Static analysis |
| Buckling | elastic critical load factors and buckled shapes for a combination | Static analysis |
| Nonlinear static | geometric and material nonlinearity under load control | Static analysis |
| Pushover | a lateral pattern increased to a target displacement with plastic hinges | Static analysis |
| Modal | natural periods, mode shapes and mass participation | Dynamic and seismic analysis |
| Ritz vectors | load-dependent Ritz vectors for the dynamic analyses | Dynamic and seismic analysis |
| Response spectrum | design spectrum by code, modal and directional combination | Dynamic and seismic analysis |
| Equivalent lateral force | base shear and storey forces by code, with accidental eccentricity | Dynamic and seismic analysis |
| Storey checks | torsional irregularity, drift, stability, period, soft storey and mass | Dynamic and seismic analysis |
| Time history | a ground acceleration record integrated in time | Dynamic and seismic analysis |
| Nonlinear time history | direct integration with plastic hinges, gravity first | Dynamic and seismic analysis |
What you can model
3D frames, trusses, plates and shells. Shells are thin or thick, with an automatic mesh matched to the frames, and contour plots show moments, forces and stresses. Nonlinear static analysis uses hinges, and the section designer works from the drawn shape and layered materials. Response spectra are available for four code systems, and time history takes pasted records.
The manual describes each step: static analysis, dynamic and seismic analysis, loads, results and design.
From analysis to design
The FEA Tool does not hold its own member checks. It sends each member, with its design actions, to the design module that covers it, and the module follows the code system you picked. Browse the design modules by material:
- Steel design
- Concrete design
- Timber design
- Masonry design
- Foundation design
- Connection design
- Structural loads
Plans and analysis types
- Free trial. 7 days of Professional modules with one code system. No card needed. After 7 days the account moves to the Free plan.
- Essential. One code system, two module packs, and a small linear frame analysis tool.
- Professional. Two code systems, every module pack, frame analysis with P-Delta, buckling and modal, and BIM import and export.
- Studio. All code systems, all modules, all analysis types including response spectrum, time history, nonlinear and pushover, the Revit link and the largest models.
See pricing for the plans and the Free plan after the trial.
Scripting and exchange
Build, run and read models from Python or JavaScript in the console of the FEA Tool: read the reference. Models can be exchanged by IFC and other formats.
Specialist features
The analysis hands every member to its design module:
- FEA to design: Analyse a 3D frame in the browser, then design every member for the envelope of the strength combinations in the module that covers it.
Related calculators
- Analysis
General single-span beam analysis - Earthquake Design Category
Earthquake Design Category (EDC) determination to AS 1170.4 ยง2 - Section Properties
Section property calculator - Static Analysis
Equivalent static earthquake analysis to AS 1170.4
TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design.
Questions
What analysis types does the FEA Tool run?
Twelve: linear static, P-Delta, buckling, nonlinear static, pushover, modal, Ritz vectors, response spectrum, equivalent lateral force, storey checks, time history and nonlinear time history. The plan you choose sets which ones are open.
Does it run in the browser?
Yes. TensorNode runs in your browser and the calculations run on your own computer. You sign in with your account to open it; there is nothing to install.
Can I script it?
Yes. Every modelling and result function is available to scripts in Python or JavaScript, in the console of the FEA Tool. See the developer reference.
Can I design the members after the analysis?
Yes. The FEA Tool sends each member, with its design actions, to the design module that covers it, and a model can be designed with the envelope of the load combinations.
Can I try it without a card?
Yes. You get 7 days of the Professional plan with no card. After that the account moves to the Free plan; nothing is charged automatically.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.