Earthquake Design Category calculator for AS 1170.4, ASCE 7, NBC 2020 and Eurocode 8
Earthquake Design Category (EDC) determination to AS 1170.4 §2.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
From the hazard product kp·Z, the site sub-soil class, the structure height and the importance level, giving the required analysis method.
Inputs
Earthquake Design Category takes 5 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Hazard | ||
| Probability factor kp (Table 3.1, annual probability P) Options: 1/2500: 1.8; 1/2000: 1.7; 1/1500: 1.5; 1/1000: 1.3; 1/800: 1.25; 1/500: 1.0; 1/250: 0.75; 1/200: 0.7; +4 more. | - | 1/500: 1.0 |
| Hazard factor Z | - | 0.08 |
| Site | ||
| Site sub-soil class Options: Ae: strong rock; Be: rock; Ce: shallow soil; De: deep/soft soil; Ee: very soft soil. | - | Ce: shallow soil |
| Structure | ||
| Total height hn | m | 12 |
| Importance level Options: IL1: low; IL2: normal; IL3: high; IL4: critical. | - | IL2: normal |
Results and report
The module reports: Hazard product kp·Z; Site sub-soil class; Importance level; Earthquake Design Category; Required analysis.
It checks: Hazard product kp·Z; Earthquake Design Category; Required analysis method.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Design codes
Earthquake Design Category works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 1170.4:2007 |
| United States | ASCE/SEI 7-22 |
| Canada | NBC 2020 |
| Europe | EN 1998-1:2004+A1:2013 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Static Analysis
Equivalent static earthquake analysis to AS 1170.4 - Dead & Live Loads
Load takedown - Flag
Wind drag on a flag/banner and pole base moment - Free Roof / Canopy
Net wind pressure and uplift on a free/canopy roof - Hoarding
Solid hoarding / freestanding wall - Monoslope Roof
Wind pressures on a monoslope (skillion) roof to AS 1170.2 §5.4 - Purlin & Girt Loads
Purlin/girt member under wind to AS 4100 - Snow Loads
Roof snow load s = s_g·C_e·μ_i to AS/NZS 1170.3:2003 for mono-pitched and duo-pitched roofs, obstructed roofs and lower roofs beside a step, with the ground snow load s_g from the snow region and the elevation (Section 5), the alpine or sub-alpine shape coeffi
Open Earthquake Design Category with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.