TensorNodeStart free trial
Home / Products / Connection design

Steel connection design software for AS 4100, AISC 360, CSA S16 and Eurocode 3

TensorNode has 13 connection design modules for Australia and New Zealand, United States, Canada and Europe. Bolts, welds, end plates, base plates, cleat plates, pins, anchor bolts, portal knees and haunches, and bolt and weld groups.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

Codes and editions

The standards below are the ones the connection design modules use, by region and with the edition each module implements. The count is the number of modules that use the standard.

RegionStandard and editionModulesUsed by
Australia and New ZealandAS 4100:202012Base Plate, Bolt Group, Bolt Tension, Bolts, Cleat Plate and 7 more
Australia and New ZealandAS 3600:20181Base Plate
Australia and New ZealandAS 5216:20211Anchor Bolt
United StatesANSI/AISC 360-2212Base Plate, Bolt Group, Bolt Tension, Bolts, Cleat Plate and 7 more
United StatesACI CODE-318-251Anchor Bolt
United StatesAISC DG 1 (2nd ed.)1Base Plate
CanadaCSA S16-1912Base Plate, Bolt Group, Bolt Tension, Bolts, Cleat Plate and 7 more
CanadaCSA A23.3-192Anchor Bolt, Base Plate
EuropeEN 1993-1-8:200511Base Plate, Bolt Group, Bolt Tension, Bolts, Cleat Plate and 6 more
EuropeEN 1993-1-1:2005+A1:20142Portal Knee, Taper Haunch
EuropeEN 1992-1-1:2004+A1:20141Base Plate
EuropeEN 1992-4:20181Anchor Bolt

What each module checks

Each name opens the page of that module, with what it checks, the standards it works to and the related modules.

Connection elements

  • Anchor Bolt
    Fastening to concrete (cast-in or post-installed anchor group) to AS 5216
  • Base Plate
    Steel column base plate to AS 3600 §12.6 and AS 4100
  • Bolts
    Single high-strength bolt capacity to AS 4100 §9.3
  • Cleat Plate
    Fin/cleat shear connection to AS 4100 §9
  • End Plate
    Bolted moment end-plate connection to AS 4100 §9
  • Pins
    Pin connection to AS 4100 §9.4
  • Portal Knee
    Bolted moment end-plate at a portal-frame knee
  • Taper Haunch
    Tapered haunch at a portal-frame knee
  • Welds
    Fillet weld capacity to AS 4100 §9.7.3

Bolt and weld groups

  • Bolt Group
    Bolt group under shear plus an out-of-plane moment to AS 4100 §9
  • Bolt Tension
    Bolt in tension with prying to AS 4100 §9
  • Eccentric Bolt Group
    Bolt group under in-plane eccentric shear (a bracket) to AS 4100 §9
  • Weld Group
    Fillet weld group under in-plane eccentric shear to AS 4100 §9.7

Report for every check

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Try it

Create a free account to use the modules: 7 days of the Professional plan, no card. 3 of the 13 modules above are among the basic calculators of the Free plan, which you keep after the trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design.

All standards and editions · All 96 modules · Pricing

Questions

Which codes do the connection design modules cover?

The 13 modules work to AS 4100, AISC 360, CSA S16 and Eurocode 3. Editions: Australia and New Zealand: AS 4100:2020, AS 3600:2018, AS 5216:2021; United States: ANSI/AISC 360-22, AISC DG 1 (2nd ed.), ACI CODE-318-25; Canada: CSA S16-19, CSA A23.3-19; Europe: EN 1993-1-8:2005, EN 1992-1-1:2004+A1:2014, EN 1993-1-1:2005+A1:2014, EN 1992-4:2018. Pick the code system once and every module follows it.

Which regions are covered?

Australia and New Zealand, United States, Canada and Europe. 13 of the 13 modules work to all four code systems.

Can I try them without a card?

Yes. Create an account with your email and a password: you get 7 days of the Professional plan with no card. After that the account moves to the Free plan and nothing is charged automatically. 3 of these 13 modules are among the basic calculators of the Free plan.

Does TensorNode include the text of the standards?

Standards are cited by number and edition only. TensorNode does not reproduce the text of any standard; keep your own current copy.

Who checks the results?

TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.