Anchor Bolt design check for AS 5216, ACI 318, CSA A23.3 and Eurocode 2
Fastening to concrete (cast-in or post-installed anchor group) to AS 5216.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Tension by steel and concrete cone breakout, shear by steel and concrete edge breakout, and the combined tension-plus-shear interaction, with edge-distance and spacing effects.
Clauses and parts as listed in the module: US: ACI CODE-318-25 Chapter 17.
Inputs
Anchor Bolt takes 10 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Anchor | ||
| Anchor diameter Options: M12; M16; M20; M24; M30. | - | M20 |
| Number of anchors | - | 4 |
| Effective embedment h_ef | mm | 120 |
| Anchor steel f_uk | MPa | 800 |
| Concrete | ||
| Concrete condition Options: Cracked; Uncracked. | - | Cracked |
| Concrete f'c | MPa | 32 |
| Geometry | ||
| Edge distance c | mm | 250 |
| Anchor spacing s | mm | 200 |
| Actions | ||
| Tension N* | kN | 40 |
| Shear V* | kN | 20 |
Results and report
The module reports: Stress area per anchor; Tension: steel / cone; Shear: steel / edge; Governing N_Rd / V_Rd; Combined interaction.
It checks: Tension: steel; Tension: concrete cone breakout; Shear: steel; Shear: concrete edge breakout; Combined tension + shear.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Anchor Bolt with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Anchor diameter | M20 |
| Number of anchors | 4 |
| Effective embedment h_ef | 120 mm |
| Anchor steel f_uk | 800 MPa |
| Concrete condition | Cracked |
| Concrete f'c | 32 MPa |
| Edge distance c | 250 mm |
| Anchor spacing s | 200 mm |
Headline results:
| Result | Value |
|---|---|
| Stress area per anchor | 245 mm² |
| Tension: steel / cone | 627 / 92 kN |
| Shear: steel / edge | 376 / 51 kN |
| Governing N_Rd / V_Rd | 92 / 51 kN |
| Combined interaction | 0.53 ≤ 1.0 |
Governing check: Combined tension + shear (AS 5216 §8), (N*/N_Rd)^1.5+(V*/V_Rd)^1.5 against ≤ 1.0, utilisation 0.53, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Anchor Bolt works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 5216:2021 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19 |
| Europe | EN 1992-4:2018 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Base Plate
Steel column base plate to AS 3600 §12.6 and AS 4100 - Bolts
Single high-strength bolt capacity to AS 4100 §9.3 - Cleat Plate
Fin/cleat shear connection to AS 4100 §9 - End Plate
Bolted moment end-plate connection to AS 4100 §9 - Pins
Pin connection to AS 4100 §9.4 - Portal Knee
Bolted moment end-plate at a portal-frame knee - Taper Haunch
Tapered haunch at a portal-frame knee - Welds
Fillet weld capacity to AS 4100 §9.7.3
Open Anchor Bolt with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.