Bolts design check for AS 4100, AISC 360, CSA S16 and Eurocode 3
Single high-strength bolt capacity to AS 4100 §9.3.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Shear (threads in/out of the shear plane, single/double shear), ply bearing and tear-out, tension, and the combined shear-and-tension interaction.
Inputs
Bolts takes 9 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Bolt | ||
| Bolt size Options: M12; M16; M20; M24; M30; M36. | - | M20 |
| Bolt grade Options: 4.6 (commercial); 8.8 (structural); 10.9 (high). | - | 8.8 (structural) |
| Threads in shear plane Options: Yes (-X, core area); No (-N, shank area). | - | Yes (-X, core area) |
| Shear planes Options: Single shear; Double shear. | - | Single shear |
| Ply | ||
| Ply thickness tp | mm | 10 |
| Ply tensile strength fup | MPa | 440 |
| Edge distance ae | mm | 40 |
| Actions | ||
| Design shear V* | kN | 60 |
| Design tension N* | kN | 30 |
Results and report
The module reports: Bolt; Shear area Ae; Shear capacity φVf; Bearing/tear-out φVb; Tension capacity φNtf; Combined (V,N).
It checks: Bolt shear; Ply bearing / tear-out; Bolt tension; Combined shear + tension.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Bolts with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Bolt size | M20 |
| Bolt grade | 8.8 (structural) |
| Threads in shear plane | Yes (-X, core area) |
| Shear planes | Single shear |
| Ply thickness tp | 10 mm |
| Ply tensile strength fup | 440 MPa |
| Edge distance ae | 40 mm |
| Design shear V* | 60 kN |
Headline results:
| Result | Value |
|---|---|
| Bolt | M20 / 8.8 |
| Shear area Ae | 225 (core) mm² |
| Shear capacity φVf | 92.7 kN |
| Bearing/tear-out φVb | 158.4 (tear-out) kN |
| Tension capacity φNtf | 162.7 kN |
| Combined (V,N) | 0.45 ≤ 1.0 |
Governing check: Bolt shear (AS 4100 §9.3.2.1), V* 60.0 kN against φVf 92.7 kN (threads in plane), utilisation 0.65, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Bolts works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 4100:2020 |
| United States | ANSI/AISC 360-22 |
| Canada | CSA S16-19 |
| Europe | EN 1993-1-8:2005 |
This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Anchor Bolt
Fastening to concrete (cast-in or post-installed anchor group) to AS 5216 - Base Plate
Steel column base plate to AS 3600 §12.6 and AS 4100 - Cleat Plate
Fin/cleat shear connection to AS 4100 §9 - End Plate
Bolted moment end-plate connection to AS 4100 §9 - Pins
Pin connection to AS 4100 §9.4 - Portal Knee
Bolted moment end-plate at a portal-frame knee - Taper Haunch
Tapered haunch at a portal-frame knee - Welds
Fillet weld capacity to AS 4100 §9.7.3
Open Bolts with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.