TensorNodeStart free trial
Home / Products / Connection design / Taper Haunch

Taper Haunch design check for AS 4100, AISC 360, CSA S16 and Eurocode 3

Tapered haunch at a portal-frame knee.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

The deepened (haunched) section at the knee and the rafter section at the haunch toe are checked for moment, with the lateral-torsional capacity of the unrestrained inner (compression) flange over the haunch length, plus.

Inputs

Taper Haunch takes 22 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Rafter
Rafter section type Options: UB; UC.-UB
Rafter section-460UB74.6
Haunch
Added haunch depth D_hmm300
Haunch length L_hm1.5
Actions
Moment at knee M*kNm300
Moment at haunch toe M*kNm180
Shear V*kN150
Stability
Moment modification α_m-1.75
Inner-flange restraint Options: Unrestrained (ke 1.0); Partial (0.85); Restrained (0.70).-Unrestrained (ke 1.0)
End plate and bolts at the knee
Bolt size Options: M16; M20; M24; M30; M36.-M24
Bolt grade Options: 8.8; 10.9.-8.8
Bolt columns Options: 2 (one each side of the web); 4 (two each side of the web).-2 (one each side of the web)
Tension bolts (a multiple of the columns)-4
Total bolts (a multiple of the columns)-8
Bolt-to-flange distance a_fmm45
Pitch of the rows inside the flanges (0 = 3d_f)mm0
Bolt gauge s_g (0 = smallest that clears the web)mm0
End distance above the top bolt row (0 = 1.5d_f)mm0
Plate width b_i (0 = flange width, widened to fit the bolts)mm0
End-plate thickness t_imm28
Plate yield f_yiMPa300
Flange weld legmm8

Results and report

The module reports: Knee depth D_k; Haunch section modulus; Knee member capacity φMbx; Reference buckling moment Mo; Toe section capacity φMs.

It checks: Haunch (knee): member moment capacity; Haunch toe: rafter section capacity; Web shear at knee; Knee bolts in tension, most loaded (per bolt); Knee bolts in shear (per bolt); Knee bolts, shear and tension combined; End-plate bending at the knee (tension flange).

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Taper Haunch with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Rafter section typeUB
Rafter section460UB74.6
Added haunch depth D_h300 mm
Haunch length L_h1.5 m
Moment at knee M*300 kNm
Moment at haunch toe M*180 kNm
Shear V*150 kN
Moment modification α_m1.75

Headline results:

ResultValue
Knee depth D_k757 mm
Haunch section modulus3254 ×10³ mm³
Knee member capacity φMbx878.5 (αs 0.88) kNm
Reference buckling moment Mo3313 kNm
Toe section capacity φMs448.2 kNm

Governing check: End-plate bending at the knee (tension flange) (AS 4100 Cl 5.2.1 · ASI DG12), M* 4543 kNmm (N_tb·a_f) against φMs 5027 kNmm (b_eff 95 mm), utilisation 0.90, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Taper Haunch works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS 4100:2020
United StatesANSI/AISC 360-22
CanadaCSA S16-19
EuropeEN 1993-1-1:2005+A1:2014

Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

  • Anchor Bolt
    Fastening to concrete (cast-in or post-installed anchor group) to AS 5216
  • Base Plate
    Steel column base plate to AS 3600 §12.6 and AS 4100
  • Bolts
    Single high-strength bolt capacity to AS 4100 §9.3
  • Cleat Plate
    Fin/cleat shear connection to AS 4100 §9
  • End Plate
    Bolted moment end-plate connection to AS 4100 §9
  • Pins
    Pin connection to AS 4100 §9.4
  • Portal Knee
    Bolted moment end-plate at a portal-frame knee
  • Welds
    Fillet weld capacity to AS 4100 §9.7.3

All connection design modules

Open Taper Haunch with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.