TensorNodeStart free trial
Home / Products / Connection design / Portal Knee

Portal Knee design check for AS 4100, AISC 360, CSA S16 and Eurocode 3

Bolted moment end-plate at a portal-frame knee.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

The rafter/column moment and shear are resisted by the tension-bolt group, the end-plate in bending and the welds; capacities are checked against the knee actions.

Inputs

Portal Knee takes 17 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Member
Member section type Options: UB; UC.-UB
Member-460UB74.6
Actions
Knee moment M*kNm180
Shear V*kN120
Bolts
Bolt size Options: M20; M24; M30.-M24
Bolt grade Options: 8.8; 10.9.-8.8
Tension bolts (even: two per row)-4
Total bolts (even)-8
Tension rows counted Options: Rows each side of the tension flange (N_f shared equally); Every tension row, force in proportion to its lever arm (rigid plate).-Rows each side of the tension flange (N_f shared equally)
Plate
Bolt-to-flange lever afmm45
End-plate thickness timm28
Plate yield fyiMPa300
Weld leg sizemm10
Plate width bi (0 = flange width, widened to fit the bolts)mm0
Bolt gauge s_g (0 = smallest that clears the web)mm0
Pitch of the rows inside the flanges (0 = 3d_f)mm0
End distance above the top bolt row (0 = 1.5d_f)mm0

Results and report

The module reports: Flange tension Nf; Tension per bolt (most loaded) / φNtf; End-plate capacity φMp (per bolt); Plate width / bolt gauge; Member φMs; Weld capacity; Bolt size / grade.

It checks: Tension bolt, most loaded (per bolt); Shear bolt; Tension bolt, shear and tension combined; End-plate bending (tension flange); Tension-flange weld; Beam section moment capacity.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Portal Knee with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Member section typeUB
Member460UB74.6
Knee moment M*180 kNm
Shear V*120 kN
Bolt sizeM24
Bolt grade8.8
Tension bolts (even: two per row)4
Total bolts (even)8

Headline results:

ResultValue
Flange tension Nf406 kN
Tension per bolt (most loaded) / φNtf101.6 / 234 kN
End-plate capacity φMp (per bolt)5027 kNmm
Plate width / bolt gauge190 / 105 mm
Member φMs448.2 kNm
Weld capacity632 kN

Governing check: End-plate bending (tension flange) (AS 4100 Cl 5.2.1 · ASI DG12), M* 4572 kNmm (Ntb·af) against φMs 5027 kNmm (b_eff 95 mm), utilisation 0.91, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Portal Knee works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS 4100:2020
United StatesANSI/AISC 360-22
CanadaCSA S16-19
EuropeEN 1993-1-8:2005, EN 1993-1-1:2005+A1:2014

Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

  • Anchor Bolt
    Fastening to concrete (cast-in or post-installed anchor group) to AS 5216
  • Base Plate
    Steel column base plate to AS 3600 §12.6 and AS 4100
  • Bolts
    Single high-strength bolt capacity to AS 4100 §9.3
  • Cleat Plate
    Fin/cleat shear connection to AS 4100 §9
  • End Plate
    Bolted moment end-plate connection to AS 4100 §9
  • Pins
    Pin connection to AS 4100 §9.4
  • Taper Haunch
    Tapered haunch at a portal-frame knee
  • Welds
    Fillet weld capacity to AS 4100 §9.7.3

All connection design modules

Open Portal Knee with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.