Weld Group design check for AS 4100, AISC 360, CSA S16 and Eurocode 3
Fillet weld group under in-plane eccentric shear to AS 4100 §9.7.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
The welds are treated as unit-throat line elements; the direct shear and the torsional shear from the eccentric moment are combined at the critical point and checked against the per-length capac.
Inputs
Weld Group takes 8 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Group | ||
| Weld configuration Options: Two vertical lines; Box (4 sides). | - | Two vertical lines |
| Weld depth d | mm | 200 |
| Weld width / gauge b | mm | 120 |
| Weld | ||
| Fillet leg | mm | 8 |
| Electrode Options: E43XX (430); E49XX (490); E55XX (550). | - | E49XX (490) |
| Weld category Options: SP (φ 0.8); GP (φ 0.6). | - | SP (φ 0.8) |
| Actions | ||
| In-plane shear V* | kN | 150 |
| Eccentricity e | mm | 100 |
Results and report
The module reports: Configuration; Weld length Lw; Polar I_p (unit throat); Direct / resultant; Capacity φvw.
It checks: Weld group (critical point).
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Weld Group with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Weld configuration | Two vertical lines |
| Weld depth d | 200 mm |
| Weld width / gauge b | 120 mm |
| Fillet leg | 8 mm |
| Electrode | E49XX (490) |
| Weld category | SP (φ 0.8) |
| In-plane shear V* | 150 kN |
| Eccentricity e | 100 mm |
Headline results:
| Result | Value |
|---|---|
| Configuration | Two vertical |
| Weld length Lw | 400 mm |
| Polar I_p (unit throat) | 2.77×10⁶ mm³ |
| Direct / resultant | 0.375 / 0.884 kN/mm |
| Capacity φvw | 1.330 kN/mm |
Governing check: Weld group (critical point) (AS 4100 §9.7.3.10), fr 0.884 kN/mm against φvw 1.330 kN/mm, utilisation 0.66, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Weld Group works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 4100:2020 |
| United States | ANSI/AISC 360-22 |
| Canada | CSA S16-19 |
| Europe | EN 1993-1-8:2005 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Bolt Group
Bolt group under shear plus an out-of-plane moment to AS 4100 §9 - Bolt Tension
Bolt in tension with prying to AS 4100 §9 - Eccentric Bolt Group
Bolt group under in-plane eccentric shear (a bracket) to AS 4100 §9 - Anchor Bolt
Fastening to concrete (cast-in or post-installed anchor group) to AS 5216 - Base Plate
Steel column base plate to AS 3600 §12.6 and AS 4100 - Bolts
Single high-strength bolt capacity to AS 4100 §9.3 - Cleat Plate
Fin/cleat shear connection to AS 4100 §9 - End Plate
Bolted moment end-plate connection to AS 4100 §9
Open Weld Group with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.