TensorNodeStart free trial
Home / Products / Structural loads / Snow Loads

Snow Loads calculator for AS/NZS 1170.3, ASCE 7, NBC 2020 and Eurocode 1

Snow Loads is a module of the snow actions group, for Australia and New Zealand, United States, Canada and Europe.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

Roof snow load s = s_g·C_e·μ_i to AS/NZS 1170.3:2003 for mono-pitched and duo-pitched roofs, obstructed roofs and lower roofs beside a step, with the ground snow load s_g from the snow region and the elevation (Section 5), the alpine or sub-alpine shape coeffi.

Clauses and parts as listed in the module: US: ASCE/SEI 7-22 Chapter 7; CA: NBC 2020 4.1.6.

Inputs

Snow Loads takes 10 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Site
Snow region (Section 2, Figures 2.1 and 2.2) Options: Region AS alpine (Southern Tablelands NSW, ACT, Vic), 1200 m and above; Region AT alpine (Tasmania), 900 m and above; New Zealand North Island alpine, 1200 to 1800 m; New Zealand South Island alpine, 900 to 1800 m; Region AS sub-alpine, 600 to 1200 m; Region AN sub-alpine (Northern Tablelands NSW); Region AC sub-alpine (Central Tablelands NSW); Region AT sub-alpine (Tasmania), 300 to 900 m; +7 more.-Region AS alpine (Southern Tablelands NSW, ACT, Vic), 1200 m and above
Site height above datum h_0m1500
Annual probability of exceedance P (Table 5.1, k_p) Options: 1/2500; 1/2000; 1/1000; 1/500; 1/250; 1/200; 1/150; 1/100; +3 more.-1/50
Terrain classification k_t (Australian alpine, 5.3) Options: 1: net removal of ground snow (0.7); 2: no removal or increase (1.0); 3: net increase (1.3).-2: no removal or increase (1.0)
Roof exposure (4.2.2, alpine regions) Options: Sheltered (C_e = 1.0); Semi-sheltered (C_e = 0.75); Windswept (C_e = 0.6).-Sheltered (C_e = 1.0)
Roof
Snow sliding off the roof Options: Unobstructed: snow can slide off; Obstructed: parapet, snow fence or other obstruction at the lower edge.-Unobstructed: snow can slide off
Roof situation Options: Gable roof (balanced and unbalanced load); Monopitch or flat roof (balanced load); Lower roof beside a higher roof or taller wall (balanced load and drift).-Gable roof (balanced and unbalanced load)
Roof slope α (upper roof α_1 at a step)°20
Roof plan dimension across the ridge (eave to eave) or roof runm12
Check
Uniform snow load assumed in the structural modelkPa4.5

Results and report

The module reports: Ground snow load s_g; k_p, C_e, γ; Balanced roof snow load; Largest roof snow load; Overhang load at the eaves s_e.

It checks: Roof snow load (largest case) vs uniform load assumed in the model; Ground snow load s_g.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Snow Loads with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Snow region (Section 2, Figures 2.1 and 2.2)Region AS alpine (Southern Tablelands NSW, ACT, Vic), 1200 m and above
Site height above datum h_01500 m
Annual probability of exceedance P (Table 5.1, k_p)1/50
Terrain classification k_t (Australian alpine, 5.3)2: no removal or increase (1.0)
Roof exposure (4.2.2, alpine regions)Sheltered (C_e = 1.0)
Snow sliding off the roofUnobstructed: snow can slide off
Roof situationGable roof (balanced and unbalanced load)
Roof slope α (upper roof α_1 at a step)20 °

Headline results:

ResultValue
Ground snow load s_g7.14 kPa
k_p, C_e, γ1.20, 1.00, 4.3 kN/m³
Shape coefficient μ_10.560
Balanced roof snow load4.00 kPa
Largest roof snow load4.00 kPa
Overhang load at the eaves s_e1.861 kN/m

Governing check: Roof snow load (largest case) vs uniform load assumed in the model (AS/NZS 1170.3 4.2.1, Eq. 4.2(1)), 4.00 kPa against 4.50 kPa, utilisation 0.89, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Snow Loads works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS/NZS 1170.3:2003
United StatesASCE/SEI 7-22
CanadaNBC 2020
EuropeEN 1991-1-3:2003+A1:2015

This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

All structural loads modules

Open Snow Loads with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.