Two-Way Slab design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2
Two-way spanning slab supported on four edges.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
The Grashof load share between the short and long spans, the positive span moments (and support hogging if continuous), reinforcement each way and the span/depth deflection control.
Inputs
Two-Way Slab takes 13 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Geometry | ||
| Short span Lx | m | 4 |
| Long span Ly | m | 5 |
| Slab depth D | mm | 200 |
| Support | ||
| Edge condition Options: Simply supported; One edge continuous; Continuous (interior). | - | Simply supported |
| Loads | ||
| Dead load G | kPa | 1.5 |
| Live load Q | kPa | 3 |
| Material | ||
| Concrete f'c | MPa | 32 |
| fsy | MPa | 500 |
| Reinforcement | ||
| Cover | mm | 25 |
| X-dir bar dia | mm | 12 |
| X-dir spacing | mm | 200 |
| Y-dir bar dia | mm | 12 |
| Y-dir spacing | mm | 250 |
Results and report
The module reports: X-dir k_u (short span); Aspect ratio Ly/Lx; Load share (short/long); Span moments Mx/My; Reinforcement X / Y; Span/depth Lx/d.
It checks: Aspect ratio Ly/Lx, two-way action; Span/depth (deflection); X-dir Flexural capacity (stress-block); X-dir Minimum reinforcement; X-dir Section ductility k_u (Under-reinforced (ductile)); X-dir Tension steel yielding; X-dir Maximum reinforcement; Y-dir Flexural capacity (stress-block); Y-dir Minimum reinforcement; Y-dir Section ductility k_u (Under-reinforced (ductile)).
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Two-Way Slab with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Short span Lx | 4 m |
| Long span Ly | 5 m |
| Slab depth D | 200 mm |
| Edge condition | Simply supported |
| Dead load G | 1.5 kPa |
| Live load Q | 3 kPa |
| Concrete f'c | 32 MPa |
| fsy | 500 MPa |
Headline results:
| Result | Value |
|---|---|
| X-dir k_u (short span) | 0.073 / Under-reinforced (ductile) |
| Aspect ratio Ly/Lx | 1.25 |
| Load share (short/long) | 4.5 / 1.8 kPa |
| Span moments Mx/My | 8.9 / 5.7 kNm/m |
| Reinforcement X / Y | 565 / 452 mm²/m |
| Span/depth Lx/d | 24 (limit 30) |
Governing check: Span/depth (deflection) (AS 3600 §9.4.4), Lx/d 23.7 against ≤ 30, utilisation 0.79, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Two-Way Slab works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3600:2018 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19 |
| Europe | EN 1992-1-1:2004+A1:2014 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam Shear
Reinforced-concrete beam shear to AS 3600 §8.2 - Beam Torsion
Reinforced-concrete beam torsion to AS 3600:2018 Cl. - Column Biaxial
RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both - Column Interaction
Rectangular reinforced-concrete column to AS 3600 §10 - Concrete Durability and Cover
Durability and cover to reinforcement to AS 3600:2018 Section 4 - Concrete Wall
RC wall in compression by the AS 3600 §11.5.3 simplified method - Corbel / Bracket
Reinforced-concrete corbel / bracket to AS 3600 - Crack Control
Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method
Open Two-Way Slab with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.