Crack Control design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2
Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
The serviceability steel stress is checked against the larger of the bar-diameter and bar-spacing limits (Tables 8.6.2.2(A) and (B), selected w'max), plus the minimum tensile rei.
Inputs
Crack Control takes 20 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Actions | ||
| Serviceability moment Ms | kNm | 90 |
| Section | ||
| Tensile steel Ast | mm² | 1800 |
| Width b | mm | 300 |
| Depth D | mm | 600 |
| Effective depth d | mm | 540 |
| Reinforcement | ||
| Bar diameter Options: N12; N16; N20; N24; N28; N32. | - | N20 |
| Bar spacing s | mm | 150 |
| Characteristic maximum crack width w'max Options: 0.2 mm; 0.3 mm; 0.4 mm. | - | 0.3 mm |
| Material | ||
| Concrete f'c | MPa | 32 |
| Effects in the crack width | ||
| Include early-age thermal contraction T1 (heat of hydration) | - | No |
| Include the seasonal temperature drop T2 | - | No |
| Include autogenous shrinkage | - | No |
| Include drying shrinkage | - | No |
| Include self-weight | - | Yes |
| Include the applied load (service moment less self-weight) | - | Yes |
| Self-weight in the service moment | ||
| Self-weight part of the service moment (0: all of it is applied load) | kNm | 0 |
| Span for an estimate of the self-weight moment (0: use the value above) | m | 0 |
| Creep coefficient for the steel stress of the Cl 8.6.2.3 width (0: short term) | - | 2 |
| Durability and service life | ||
| Exposure for the tolerable crack width (ACI 224R Table 4.1) Options: Dry air or protective membrane, 0.41 mm; Humidity, moist air, soil, 0.3 mm; De-icing chemicals, 0.18 mm; Seawater and seawater spray, wetting and drying, 0.15 mm; Water-retaining structures, 0.1 mm. | - | Humidity, moist air, soil, 0.3 mm |
| Service-life effect of the crack (ACI 365.1R) Options: Not assessed; Chloride initiation at the crack. | - | Not assessed |
Results and report
The module reports: Serviceability steel stress fs; Limit for bar dia; Limit for spacing; Min tensile reo.
It checks: Steel stress vs the larger of the bar-diameter and bar-spacing limits; Minimum tensile reinforcement.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Crack Control with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Serviceability moment Ms | 90 kNm |
| Tensile steel Ast | 1800 mm² |
| Width b | 300 mm |
| Depth D | 600 mm |
| Effective depth d | 540 mm |
| Bar diameter | N20 |
| Bar spacing s | 150 mm |
| Characteristic maximum crack width w'max | 0.3 mm |
Headline results:
| Result | Value |
|---|---|
| Serviceability steel stress fs | 109 MPa |
| Limit for bar dia | 195 (db 20) MPa |
| Limit for spacing | 245 (s 150) MPa |
| Limit used (larger), w'max 0.3 mm | 245 MPa |
| Min tensile reo | 272 (Ast 1800) mm² |
Governing check: Steel stress vs the larger of the bar-diameter and bar-spacing limits (AS 3600 §8.6.2.2(b), Tables 8.6.2.2(A) and (B)), fs 109 MPa against max(195 (db 20 mm), 245 (s 150 mm)) = 245 MPa, utilisation 0.44, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Crack Control works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3600:2018 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19 |
| Europe | EN 1992-1-1:2004+A1:2014 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam Shear
Reinforced-concrete beam shear to AS 3600 §8.2 - Beam Torsion
Reinforced-concrete beam torsion to AS 3600:2018 Cl. - Column Biaxial
RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both - Column Interaction
Rectangular reinforced-concrete column to AS 3600 §10 - Concrete Durability and Cover
Durability and cover to reinforcement to AS 3600:2018 Section 4 - Concrete Wall
RC wall in compression by the AS 3600 §11.5.3 simplified method - Corbel / Bracket
Reinforced-concrete corbel / bracket to AS 3600 - Deep Beam
RC deep beam (span/depth < 2) by strut-and-tie to AS 3600 §7
Open Crack Control with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.