Deep Beam design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2
RC deep beam (span/depth < 2) by strut-and-tie to AS 3600 §7.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
A diagonal concrete strut carries the load to the supports and a bottom tie carries the tension; the strut, tie, node bearing and diagonal-compression limit are checked.
Inputs
Deep Beam takes 18 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Clear span Ln | mm | 3000 |
| Overall depth D | mm | 1800 |
| Width bw | mm | 500 |
| Bearing width | mm | 350 |
| Concrete f'c | MPa | 32 |
| Steel fsy | MPa | 500 |
| Tie bar dia Options: N16; N20; N24; N28; N32. | - | N24 |
| Tie bars | - | 6 |
| Cover | mm | 40 |
| Design load P* | kN | 1000 |
| Horizontal web bars per level (2 = one each face) | - | 2 |
| Horizontal web bar Options: none; N10; N12; N16; N20. | - | N20 |
| Horizontal bar spacing | mm | 200 |
| Vertical web bar legs (2 = closed link, one leg each face) | - | 2 |
| Vertical web bar (links) Options: none; N10; N12; N16. | - | N16 |
| Vertical bar spacing | mm | 200 |
| Tie anchorage at the support Options: 90° cog (AS 3600 13.1.2.6, 13.1.2.7); Straight bar. | - | 90° cog (AS 3600 13.1.2.6, 13.1.2.7) |
| Service load P_s for crack control (0 = P*/1.4) | kN | 0 |
Results and report
The module reports: Span/depth Ln/D; Strut angle θ; Strut efficiency βs; Strut / tie force; Tie steel required; Web ρ_h / ρ_v; Bursting T*_b / φ capacity; Tie anchorage req / avail.
It checks: Bursting reinforcement, strength: φ_st·ΣA_si·f_sy·sinγ_i ≥ T*_b; Bursting reinforcement, serviceability: ΣA_si·f_si·sinγ_i ≥ max(T*_b.s, T_b.cr); Diagonal strut; Bottom tie; Diagonal-compression limit.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Deep Beam with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Clear span Ln | 3000 mm |
| Overall depth D | 1800 mm |
| Width bw | 500 mm |
| Bearing width | 350 mm |
| Concrete f'c | 32 MPa |
| Steel fsy | 500 MPa |
| Tie bar dia | N24 |
| Tie bars | 6 |
Headline results:
| Result | Value |
|---|---|
| Span/depth Ln/D | 1.67 (deep) |
| Strut angle θ | 64.5 ° |
| Strut efficiency βs | 0.87 |
| Strut / tie force | 1108 / 477 kN |
| Tie steel required | 1122 mm² |
| Web ρ_h / ρ_v | 0.628 / 0.402 % |
Governing check: Bursting reinforcement, serviceability: ΣA_si·f_si·sinγ_i ≥ max(T*_b.s, T_b.cr) (AS 3600 §7.2.4 Eq. 7.2.4(2), §12.7), 985 kN (T*_b.s 396 kN at P_s 714 kN, T_b.cr 985 kN) against 1013 kN (f_si 250 MPa, moderate control), utilisation 0.97, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Deep Beam works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3600:2018 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19 |
| Europe | EN 1992-1-1:2004+A1:2014 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam Shear
Reinforced-concrete beam shear to AS 3600 §8.2 - Beam Torsion
Reinforced-concrete beam torsion to AS 3600:2018 Cl. - Column Biaxial
RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both - Column Interaction
Rectangular reinforced-concrete column to AS 3600 §10 - Concrete Durability and Cover
Durability and cover to reinforcement to AS 3600:2018 Section 4 - Concrete Wall
RC wall in compression by the AS 3600 §11.5.3 simplified method - Corbel / Bracket
Reinforced-concrete corbel / bracket to AS 3600 - Crack Control
Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method
Open Deep Beam with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.