TensorNodeStart free trial
Home / Products / Concrete design / Beam Shear

Beam Shear design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2

Reinforced-concrete beam shear to AS 3600 §8.2.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

Concrete contribution φVuc plus shear-reinforcement φVus (vertical stirrups), with the minimum-reinforcement and maximum-spacing detailing and the web-crushing limit.

Inputs

Beam Shear takes 9 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Geometry
Web width bmm300
Overall depth Dmm600
Effective depth dmm540
Material
Concrete f'cMPa32
Stirrup fsyMPa500
Stirrups
Stirrup bar diamm10
Number of legs-2
Stirrup spacing smm200
Actions
Design shear V*kN250

Results and report

The module reports: Effective shear depth dv; Stirrup area Asv; kv; Concrete φVuc; Stirrups φVus; Total φVu; Web-crushing φVu,max.

It checks: Shear capacity; Web-crushing limit; Minimum shear reinforcement; Maximum stirrup spacing.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Beam Shear with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Web width b300 mm
Overall depth D600 mm
Effective depth d540 mm
Concrete f'c32 MPa
Stirrup fsy500 MPa
Stirrup bar dia10 mm
Number of legs2
Stirrup spacing s200 mm

Headline results:

ResultValue
Effective shear depth dv486 mm
Stirrup area Asv157 mm²
kv0.150
Concrete φVuc93 kN
Stirrups φVus197 kN
Total φVu290 kN

Governing check: Shear capacity (AS 3600 §8.2.3), V* 250 kN against φVu 290 kN (Vuc 93 + Vus 197), utilisation 0.86, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Beam Shear works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS 3600:2018
United StatesACI CODE-318-25
CanadaCSA A23.3-19
EuropeEN 1992-1-1:2004+A1:2014

This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

  • Beam Torsion
    Reinforced-concrete beam torsion to AS 3600:2018 Cl.
  • Column Biaxial
    RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both
  • Column Interaction
    Rectangular reinforced-concrete column to AS 3600 §10
  • Concrete Durability and Cover
    Durability and cover to reinforcement to AS 3600:2018 Section 4
  • Concrete Wall
    RC wall in compression by the AS 3600 §11.5.3 simplified method
  • Corbel / Bracket
    Reinforced-concrete corbel / bracket to AS 3600
  • Crack Control
    Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method
  • Deep Beam
    RC deep beam (span/depth < 2) by strut-and-tie to AS 3600 §7

All concrete design modules

Open Beam Shear with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.