Beam Torsion design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2
Beam Torsion is a module of the concrete group, for Australia and New Zealand, United States, Canada and Europe.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Reinforced-concrete beam torsion to AS 3600:2018 Cl.
Inputs
Beam Torsion takes 18 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Section | ||
| Web width b | mm | 300 |
| Overall depth h | mm | 600 |
| Cover to the outside of the closed stirrup | mm | 40 |
| Materials | ||
| Concrete strength f'c | MPa | 32 |
| Longitudinal steel yield strength f_sy | MPa | 500 |
| Stirrup yield strength f_sy.f | MPa | 500 |
| Stirrups | ||
| Closed stirrup bar size Options: N10; N12; N16. | - | N10 |
| Stirrup legs across the width (2 = one closed stirrup) | - | 2 |
| Stirrup spacing s | mm | 150 |
| Longitudinal steel | ||
| Flexural tension bar size Options: N16; N20; N24; N28; N32; N36. | - | N24 |
| Flexural tension bars (bottom row, both corners included) | - | 3 |
| Torsion longitudinal bar size Options: N12; N16; N20; N24. | - | N16 |
| Torsion longitudinal bars (two top corner bars plus side bars) | - | 6 |
| Actions | ||
| Type of torsion Options: Equilibrium torsion (needed for stability); Compatibility torsion (redistribution possible). | - | Equilibrium torsion (needed for stability) |
| Factored torsion T* | kNm | 20 |
| Factored shear V* at the section | kN | 150 |
| Factored moment M* at the section | kNm | 200 |
| Method | ||
| Shear method Options: Simplified, θ_v = 36° (Cl. 8.2.4.3); General, ε_x method (Cl. 8.2.4.2.3). | - | Simplified, θ_v = 36° (Cl. 8.2.4.3) |
Results and report
The module reports: Cracking torsion T_cr; Design torsion used; Area within stirrup centreline A_oh; Stirrup centreline perimeter u_h; Strut angle θ; Torsion stirrup need A_sw/s; Stirrup leg provided A_b/s; Additional longitudinal tension ΔF_td; Tension side demand T_td; Tension side capacity φA_st·f_sy; Torsion strength φT_us; Shear strength φV_u.
It checks: Web crushing, combined shear and torsion; Shear strength φV_u ≥ V*_eq; Torsion strength φT_us ≥ T*; Transverse steel for shear plus torsion, per leg; Minimum shear fitments; Minimum torsion fitments; Fitment spacing; Flexural tension side: T_td ≤ φ A_st f_sy; Flexural compression side: T_cd ≤ φ A_sc f_sy; Longitudinal bar in each corner of the fitment.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Beam Torsion with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Web width b | 300 mm |
| Overall depth h | 600 mm |
| Cover to the outside of the closed stirrup | 40 mm |
| Concrete strength f'c | 32 MPa |
| Longitudinal steel yield strength f_sy | 500 MPa |
| Stirrup yield strength f_sy.f | 500 MPa |
| Closed stirrup bar size | N10 |
| Stirrup legs across the width (2 = one closed stirrup) | 2 |
Headline results:
| Result | Value |
|---|---|
| Cracking torsion T_cr | 33.6 kNm |
| Threshold 0.25φT_cr | 6.3 kNm |
| Design torsion used | 20.0 kNm |
| Area within stirrup centreline A_oh | 107100 mm² |
| Stirrup centreline perimeter u_h | 1440 mm |
| Shear flow q = T/(2A_o) | 109.8 kN/m |
Governing check: Longitudinal bar in each corner of the fitment (AS 3600:2018 Cl. 8.3.3(c)), 4 against 4, utilisation 1.00, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Beam Torsion works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3600:2018 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19 |
| Europe | EN 1992-1-1:2004+A1:2014 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam Shear
Reinforced-concrete beam shear to AS 3600 §8.2 - Column Biaxial
RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both - Column Interaction
Rectangular reinforced-concrete column to AS 3600 §10 - Concrete Durability and Cover
Durability and cover to reinforcement to AS 3600:2018 Section 4 - Concrete Wall
RC wall in compression by the AS 3600 §11.5.3 simplified method - Corbel / Bracket
Reinforced-concrete corbel / bracket to AS 3600 - Crack Control
Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method - Deep Beam
RC deep beam (span/depth < 2) by strut-and-tie to AS 3600 §7
Open Beam Torsion with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.