TensorNodeStart free trial
Home / Products / Concrete design / Column Interaction

Column Interaction design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2

Rectangular reinforced-concrete column to AS 3600 §10.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

Squash load, full N-M interaction by strain compatibility, biaxial bending about both axes, capacity-point table and slenderness screen.

Inputs

Column Interaction takes 22 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Width bmm400
Depth Dmm400
Concrete f'cMPa32
Steel fsyMPa500
Bar diametermm24
Bars per top/bottom face (resist Mx)-3
Bars per left/right face (resist My)-3
Covermm40
Ligature legs (across shear)-2
Ligature/tie diametermm10
Ligature spacingmm200
Skin bars per side face (0 = none)-0
Skin bar diametermm12
Axial N*kN2500
Moment M*xkNm150
Moment M*ykNm0
Effective length Lem3
Column bracing (AS 3600 10.3.1) Options: Braced; Unbraced (sway).-Braced
End moment ratio M1*/M2* (+ double curvature, −1 single)--1
β_d = G/(G+Q) of the axial load-0.6
Unbraced: storey ΣN*/ΣN_c (10.4.3(1); 0 = not known)-0
Unbraced: λ_uc from a frame buckling analysis (10.4.3(2); 0 = not used)-0

Results and report

The module reports: Gross area Ag; Steel Ast (ρ); Squash N_uo; φN_uo; φMux at N* (about X); φMuy at N* (about Y); Biaxial exponent αn; Slenderness Le/r.

It checks: Axial squash; Uniaxial M about X (at N*); Column classification; Minimum reinforcement p_g; Maximum reinforcement p_g.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Column Interaction with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Width b400 mm
Depth D400 mm
Concrete f'c32 MPa
Steel fsy500 MPa
Bar diameter24 mm
Bars per top/bottom face (resist Mx)3
Bars per left/right face (resist My)3
Cover40 mm

Headline results:

ResultValue
Gross area Ag1.60×10⁵ mm²
Steel Ast (ρ)3619 (2.26%) mm²
Squash N_uo6063 kN
φN_uo3941 kN
φMux at N* (about X)160 kNm
φMuy at N* (about Y)160 kNm

Governing check: Ligature spacing ≤ min(0.5D, 300, D_c, 15d_b) (AS 3600 §8.3.2.2, §10.7.4.3), s 200 mm (2 legs N10) against ≤ 200 mm, utilisation 1.00, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Column Interaction works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS 3600:2018
United StatesACI CODE-318-25
CanadaCSA A23.3-19
EuropeEN 1992-1-1:2004+A1:2014

This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

  • Beam Shear
    Reinforced-concrete beam shear to AS 3600 §8.2
  • Beam Torsion
    Reinforced-concrete beam torsion to AS 3600:2018 Cl.
  • Column Biaxial
    RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both
  • Concrete Durability and Cover
    Durability and cover to reinforcement to AS 3600:2018 Section 4
  • Concrete Wall
    RC wall in compression by the AS 3600 §11.5.3 simplified method
  • Corbel / Bracket
    Reinforced-concrete corbel / bracket to AS 3600
  • Crack Control
    Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method
  • Deep Beam
    RC deep beam (span/depth < 2) by strut-and-tie to AS 3600 §7

All concrete design modules

Open Column Interaction with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.