Tree Effects: y_s design check for AS 2870
Characteristic surface movement y_s and AS 2870 site classification, including the effect of nearby trees that dry the soil more deeply.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
The instability index, design suction change and depth of suction change give y_s, which trees increase by extending the ac.
Inputs
Tree Effects: y_s takes 6 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Soil | ||
| Instability index I_pt | %/pF | 2 |
| Surface suction change u_s | pF | 1.2 |
| Depth of suction change H_s | m | 1.8 |
| Trees | ||
| Mature tree height | m | 8 |
| Distance to footing | m | 4 |
| Number of trees | - | 1 |
Results and report
The module reports: y_s without trees; Tree influence factor; Depth of suction change H_s; Tree-affected y_s; Site class shift.
It checks: Characteristic movement y_s (no tree); Tree-affected y_s; Depth of design suction change.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Tree Effects: y_s with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Instability index I_pt | 2 %/pF |
| Surface suction change u_s | 1.2 pF |
| Depth of suction change H_s | 1.8 m |
| Mature tree height | 8 m |
| Distance to footing | 4 m |
| Number of trees | 1 |
Headline results:
| Result | Value |
|---|---|
| y_s without trees | 21.6 → Class M mm |
| Tree influence factor | 0.67 (×1.53 depth) |
| Depth of suction change H_s | 1.8 → 2.8 m |
| Tree-affected y_s | 33.1 → Class M mm |
| Site class shift | none |
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Tree Effects: y_s works to 1 code system in Australia and New Zealand. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 2870:2011 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Basement Wall
Basement wall - Earth Pressure
Lateral earth pressure by Rankine theory - Industrial Slab
Industrial slab-on-grade under a concentrated (wheel/post) load - Residential Slab
Stiffened-raft / waffle footing screening to AS 2870 - Retaining Wall
Generic cantilever retaining wall - Sleeper Wall
Sleeper wall - Bored Pier
Bored (CFA/cast-in-situ) pier - Combined Footing
Combined footing supporting two columns
Open Tree Effects: y_s with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.