Earth Pressure design check for AS 4678, ASCE 7, NBC 2020 and Eurocode 7
Lateral earth pressure by Rankine theory.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Active, at-rest or passive coefficient, the soil/surcharge/water pressure diagram, the total thrust and its line of action for use in retaining-wall and basement design.
Inputs
Earth Pressure takes 7 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Pressure mode Options: Active (Ka); At-rest (Ko); Passive (Kp). | - | Active (Ka) |
| Retained height H | m | 3 |
| Soil unit weight γ | kN/m³ | 18 |
| Friction angle φ | ° | 30 |
| Surcharge q | kPa | 10 |
| Water depth at base | m | 0 |
| Wall resistance capacity (0 = loading only) | kN/m | 0 |
Results and report
The module reports: Coefficient K; Soil thrust; Surcharge / water thrust; Total thrust Ptot; Resultant height.
It checks: Pressure coefficient K (active); Soil thrust P_soil; Surcharge thrust P_q; Total lateral thrust P_tot; Pressure at base.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Earth Pressure with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Pressure mode | Active (Ka) |
| Retained height H | 3 m |
| Soil unit weight γ | 18 kN/m³ |
| Friction angle φ | 30 ° |
| Surcharge q | 10 kPa |
| Water depth at base | 0 m |
| Wall resistance capacity (0 = loading only) | 0 kN/m |
Headline results:
| Result | Value |
|---|---|
| Coefficient K | 0.333 (active) |
| Soil thrust | 27.0 kN/m |
| Surcharge / water thrust | 10.0 / 0.0 kN/m |
| Total thrust Ptot | 37.0 kN/m |
| Resultant height | 1.14 (base pressure 21.3 kPa) m |
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Earth Pressure works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 4678:2002 |
| United States | ASCE/SEI 7-22 |
| Canada | NBC 2020 |
| Europe | EN 1997-1:2004+A1:2013 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Basement Wall
Basement wall - Industrial Slab
Industrial slab-on-grade under a concentrated (wheel/post) load - Residential Slab
Stiffened-raft / waffle footing screening to AS 2870 - Retaining Wall
Generic cantilever retaining wall - Sleeper Wall
Sleeper wall - Tree Effects: y_s
Characteristic surface movement y_s and AS 2870 site classification, including the effect of nearby trees that dry the soil more deeply - Bored Pier
Bored (CFA/cast-in-situ) pier - Combined Footing
Combined footing supporting two columns
Open Earth Pressure with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.