Strut & Tie design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2
Strut-and-tie model for a concrete D-region / deep beam to AS 3600 §7.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Strut efficiency factor βs, diagonal-strut and bottom-tie capacities, node bearing, the diagonal-compression limit, and tie reinforcement (bar diameter and number).
Inputs
Strut & Tie takes 19 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Member depth D | mm | 800 |
| Width bw | mm | 400 |
| Load-to-support distance a | m | 0.8 |
| Strut angle θ (0 = auto) | ° | 0 |
| Bearing/load width | mm | 300 |
| Concrete f'c | MPa | 40 |
| Steel fsy | MPa | 500 |
| Applied load P* | kN | 400 |
| Tie bar diameter | mm | 20 |
| Number of tie bars | - | 6 |
| Cover to tie | mm | 40 |
| Horizontal web bars per level (2 = one each face) | - | 2 |
| Horizontal web bar Options: none; N10; N12; N16; N20. | - | N16 |
| Horizontal bar spacing | mm | 150 |
| Vertical web bar legs (2 = closed link, one leg each face) | - | 2 |
| Vertical web bar (links) Options: none; N10; N12; N16. | - | N16 |
| Vertical bar spacing | mm | 150 |
| Tie anchorage at the support Options: 90° cog (AS 3600 13.1.2.6, 13.1.2.7); Straight bar. | - | 90° cog (AS 3600 13.1.2.6, 13.1.2.7) |
| Service load P_s for crack control (0 = P*/1.4) | kN | 0 |
Results and report
The module reports: Strut angle θ; Strut efficiency βs; Strut force C; Strut capacity φC; Tie force T; Tie Ast (req / prov); Tie capacity φT; Diagonal limit; Web ρ_h / ρ_v; Bursting T*_b / φ capacity.
It checks: Bursting reinforcement, strength: φ_st·ΣA_si·f_sy·sinγ_i ≥ T*_b; Bursting reinforcement, serviceability: ΣA_si·f_si·sinγ_i ≥ max(T*_b.s, T_b.cr); Diagonal strut; Bottom tie; Diagonal-compression limit.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Strut & Tie with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Member depth D | 800 mm |
| Width bw | 400 mm |
| Load-to-support distance a | 0.8 m |
| Strut angle θ (0 = auto) | 0 ° |
| Bearing/load width | 300 mm |
| Concrete f'c | 40 MPa |
| Steel fsy | 500 MPa |
| Applied load P* | 400 kN |
Headline results:
| Result | Value |
|---|---|
| Strut angle θ | 40.2 ° |
| Strut efficiency βs | 0.519 |
| Strut force C | 620 kN |
| Strut capacity φC | 1311 kN |
| Tie force T | 474 kN |
| Tie Ast (req / prov) | 1115 / 1885 mm² |
Governing check: Bursting reinforcement, serviceability: ΣA_si·f_si·sinγ_i ≥ max(T*_b.s, T_b.cr) (AS 3600 §7.2.4 Eq. 7.2.4(2), §12.7), 495 kN (T*_b.s 222 kN at P_s 286 kN, T_b.cr 495 kN) against 521 kN (f_si 250 MPa, moderate control), utilisation 0.95, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Strut & Tie works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3600:2018 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19 |
| Europe | EN 1992-1-1:2004+A1:2014 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam Shear
Reinforced-concrete beam shear to AS 3600 §8.2 - Beam Torsion
Reinforced-concrete beam torsion to AS 3600:2018 Cl. - Column Biaxial
RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both - Column Interaction
Rectangular reinforced-concrete column to AS 3600 §10 - Concrete Durability and Cover
Durability and cover to reinforcement to AS 3600:2018 Section 4 - Concrete Wall
RC wall in compression by the AS 3600 §11.5.3 simplified method - Corbel / Bracket
Reinforced-concrete corbel / bracket to AS 3600 - Crack Control
Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method
Open Strut & Tie with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.