TensorNodeStart free trial

Stair design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2

RC stair flight (waist slab).

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

The dead load of the inclined waist and steps plus the live load, the span moment and shear, the flexural reinforcement and the span/depth serviceability check.

Inputs

Stair takes 11 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Geometry
Going span Lm3
Waist thicknessmm150
Goingmm250
Risemm175
Loads
Live load QkPa3
FinisheskPa1
Material
Concrete f'cMPa32
Steel fsyMPa500
Covermm25
Reinforcement
Main bar diametermm12
Main bar spacingmm150

Results and report

The module reports: Slope factor; Dead load (on plan); Factored load; Moment / shear; Neutral axis k_u; Tension steel; Capacity φMu / Ast.

It checks: Flexural capacity; Minimum reinforcement; Span/depth (deflection); Section ductility k_u (Under-reinforced (ductile)); Tension steel yielding; Maximum reinforcement.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Stair with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Going span L3 m
Waist thickness150 mm
Going250 mm
Rise175 mm
Live load Q3 kPa
Finishes1 kPa
Concrete f'c32 MPa
Steel fsy500 MPa

Headline results:

ResultValue
Slope factor1.221
Dead load (on plan)7.49 kPa
Factored load13.49 kPa
Moment / shear12.1 / 20.2 kNm, kN
Neutral axis k_u0.139 / Under-reinforced (ductile)
Tension steelyielding ✓

Governing check: Span/depth (deflection) (AS 3600 §9.4), L/d 25.2 against ≤ 30, utilisation 0.84, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Stair works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS 3600:2018
United StatesACI CODE-318-25
CanadaCSA A23.3-19
EuropeEN 1992-1-1:2004+A1:2014

Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

  • Beam Shear
    Reinforced-concrete beam shear to AS 3600 §8.2
  • Beam Torsion
    Reinforced-concrete beam torsion to AS 3600:2018 Cl.
  • Column Biaxial
    RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both
  • Column Interaction
    Rectangular reinforced-concrete column to AS 3600 §10
  • Concrete Durability and Cover
    Durability and cover to reinforcement to AS 3600:2018 Section 4
  • Concrete Wall
    RC wall in compression by the AS 3600 §11.5.3 simplified method
  • Corbel / Bracket
    Reinforced-concrete corbel / bracket to AS 3600
  • Crack Control
    Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method

All concrete design modules

Open Stair with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.