TensorNodeStart free trial
Home / Products / Concrete design / One-Way Slab

One-Way Slab design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2

One-way reinforced-concrete slab to AS 3600.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

User-input bar diameter and spacing for the bottom (sag), top (hog) and secondary layers, with factored and service loads; flexure, one-way shear, service deflection, minimum reinforcement and crack-control checks.

Inputs

One-Way Slab takes 14 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Geometry
Span Lm4
Slab thickness Dmm200
Covermm25
Continuity Options: Simply supported; Continuous.-Simply supported
Material
Concrete f'cMPa32
Steel fsyMPa500
Bottom layer
Bottom bar diamm12
Bottom spacingmm200
Top layer
Top bar diamm12
Top spacingmm250
Secondary
Secondary bar diamm10
Secondary spacingmm250
Loads
Factored load w*kPa12
Service load w_skPa8

Results and report

The module reports: Bottom Ast (provided); Top Ast (provided); Secondary Ast; Sag moment / φMu; Shear φVuc; Effective inertia Ief/Ig; Service deflection δ; Min reinforcement.

It checks: Sagging flexure (bottom); One-way shear; Deflection (service); Minimum reinforcement; Section ductility k_u (Under-reinforced (ductile)); Tension steel yielding; Maximum reinforcement.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

One-Way Slab with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Span L4 m
Slab thickness D200 mm
Cover25 mm
ContinuitySimply supported
Concrete f'c32 MPa
Steel fsy500 MPa
Bottom bar dia12 mm
Bottom spacing200 mm

Headline results:

ResultValue
Bottom Ast (provided)565 mm²/m
Top Ast (provided)452 mm²/m
Secondary Ast314 mm²/m
Sag moment / φMu24.0 / 39.3 kNm/m
Shear φVuc90.3 kN/m
Effective inertia Ief/Ig1.00

Governing check: Sagging flexure (bottom) (AS 3600 §8.1), M+ 24.0 kNm against φMu 39.3 kNm, utilisation 0.61, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

One-Way Slab works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS 3600:2018
United StatesACI CODE-318-25
CanadaCSA A23.3-19
EuropeEN 1992-1-1:2004+A1:2014

This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

  • Beam Shear
    Reinforced-concrete beam shear to AS 3600 §8.2
  • Beam Torsion
    Reinforced-concrete beam torsion to AS 3600:2018 Cl.
  • Column Biaxial
    RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both
  • Column Interaction
    Rectangular reinforced-concrete column to AS 3600 §10
  • Concrete Durability and Cover
    Durability and cover to reinforcement to AS 3600:2018 Section 4
  • Concrete Wall
    RC wall in compression by the AS 3600 §11.5.3 simplified method
  • Corbel / Bracket
    Reinforced-concrete corbel / bracket to AS 3600
  • Crack Control
    Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method

All concrete design modules

Open One-Way Slab with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.