Reinforcement Table design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2
Reinforcement quantity reference.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Bar area, number of bars per metre and steel area for a chosen bar diameter and spacing (or count over a width), with a quick area-per-metre lookup grid.
Inputs
Reinforcement Table takes 3 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Bar diameter | mm | 16 |
| Spacing | mm | 200 |
| Width (for count) | mm | 1000 |
Results and report
The module reports: Bar area A_b; Bars per metre; Area per metre; Bars over width; Total steel area.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Reinforcement Table with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Bar diameter | 16 mm |
| Spacing | 200 mm |
| Width (for count) | 1000 mm |
Headline results:
| Result | Value |
|---|---|
| Bar area A_b | 201 mm² |
| Bars per metre | 5.00 /m |
| Area per metre | 1005 mm²/m |
| Bars over width | 6 |
| Total steel area | 1206 mm² |
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Reinforcement Table works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3600:2018 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19, CSA G30.18 |
| Europe | EN 1992-1-1:2004+A1:2014, EN 10080 |
This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam Shear
Reinforced-concrete beam shear to AS 3600 §8.2 - Beam Torsion
Reinforced-concrete beam torsion to AS 3600:2018 Cl. - Column Biaxial
RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both - Column Interaction
Rectangular reinforced-concrete column to AS 3600 §10 - Concrete Durability and Cover
Durability and cover to reinforcement to AS 3600:2018 Section 4 - Concrete Wall
RC wall in compression by the AS 3600 §11.5.3 simplified method - Corbel / Bracket
Reinforced-concrete corbel / bracket to AS 3600 - Crack Control
Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method
Open Reinforcement Table with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.