Punching Shear design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2
Two-way (punching) shear at a slab-column connection to AS 3600 §9.3.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Circular or rectangular column, interior/edge/corner case, unbalanced-moment transfer, and shear-reinforcement / integrity check.
Inputs
Punching Shear takes 10 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Column | ||
| Column shape Options: Rectangular; Circular. | - | Rectangular |
| Column position Options: Interior (4 sides); Edge (3 sides); Corner (2 sides). | - | Interior (4 sides) |
| Column cx | mm | 400 |
| Column cy | mm | 400 |
| Slab | ||
| Slab effective depth d_om | mm | 230 |
| Concrete f'c | MPa | 32 |
| Actions | ||
| Column reaction V* | kN | 600 |
| Unbalanced moment M*v | kNm | 60 |
| Reinforcement | ||
| Shear reinforcement Options: None (concrete only); Stud/fitment shear reo. | - | None (concrete only) |
| Structural integrity bottom bars through column | - | Yes |
Results and report
The module reports: Critical perimeter u; Column aspect βh; Concrete stress fcv; Basic capacity Vuo; Moment-transfer factor; φVu (with moment); Shear reo required?; φVu,max (with reo).
It checks: Punching shear; Structural integrity bars (bottom, through column).
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Punching Shear with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Column shape | Rectangular |
| Column position | Interior (4 sides) |
| Column cx | 400 mm |
| Column cy | 400 mm |
| Slab effective depth d_om | 230 mm |
| Concrete f'c | 32 MPa |
| Column reaction V* | 600 kN |
| Unbalanced moment M*v | 60 kNm |
Headline results:
| Result | Value |
|---|---|
| Critical perimeter u | 2520 mm |
| Column aspect βh | 1.00 |
| Concrete stress fcv | 1.92 MPa |
| Basic capacity Vuo | 1115 kN |
| Moment-transfer factor | 1.217 |
| φVu (with moment) | 641 kN |
Governing check: Punching shear (AS 3600 §9.3), V* 600.0 kN against φVu 641.0 kN, utilisation 0.94, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Punching Shear works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3600:2018 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19 |
| Europe | EN 1992-1-1:2004+A1:2014 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam Shear
Reinforced-concrete beam shear to AS 3600 §8.2 - Beam Torsion
Reinforced-concrete beam torsion to AS 3600:2018 Cl. - Column Biaxial
RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both - Column Interaction
Rectangular reinforced-concrete column to AS 3600 §10 - Concrete Durability and Cover
Durability and cover to reinforcement to AS 3600:2018 Section 4 - Concrete Wall
RC wall in compression by the AS 3600 §11.5.3 simplified method - Corbel / Bracket
Reinforced-concrete corbel / bracket to AS 3600 - Crack Control
Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method
Open Punching Shear with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.