Flexure Member design check for AS 3600, ACI 318, CSA A23.3 and Eurocode 2
Rectangular, T- and L-beam flexure to AS 3600.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Bar-by-bar reinforcement (number and size), with the section classified balanced / under- / over-reinforced, a tension-steel yielding check, minimum and maximum steel, optional compression steel (doubly-reinforced.
Inputs
Flexure Member takes 17 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Section type Options: Rectangular; T-beam; L-beam. | - | Rectangular |
| Web width b | mm | 300 |
| Overall depth D | mm | 700 |
| Sustained fraction of the service load (G + ψ_l Q)/(G + ψ_s Q) | - | 0.7 |
| f'c | MPa | 32 |
| fsy | MPa | 500 |
| Cover | mm | 40 |
| Tension bars: number | - | 4 |
| Tension bar diameter Options: N12; N16; N20; N24; N28; N32; N36. | - | N24 |
| Compression bars: number (0 = singly) | - | 0 |
| Compression bar diameter Options: N12; N16; N20; N24; N28. | - | N16 |
| Ligature legs | - | 2 |
| Ligature diameter Options: none; R10/N10; N12; N16. | - | R10/N10 |
| Ligature spacing | mm | 200 |
| Span L | m | 8 |
| Design actions Options: From the span and the factored UDL w*; Enter M*, V* and the service moment M_s. | - | From the span and the factored UDL w* |
| UDL w* | kN/m | 30 |
Results and report
The module reports: Effective depth d; Tension steel A_st; Neutral axis k_u; Tension steel; Moment capacity φMu; Design moment M*; Shear capacity φVu; A_st,min / A_st,max; Deflection δ / crack util.
It checks: Flexural capacity; Section ductility k_u (Under-reinforced (ductile)); Tension steel yielding; Minimum reinforcement; Maximum reinforcement (singly); Shear capacity (ligatures); Deflection (SLS), total incl. long-term; Crack control (SLS).
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Flexure Member with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Section type | Rectangular |
| Web width b | 300 mm |
| Overall depth D | 700 mm |
| Sustained fraction of the service load (G + ψ_l Q)/(G + ψ_s Q) | 0.7 |
| f'c | 32 MPa |
| fsy | 500 MPa |
| Cover | 40 mm |
| Tension bars: number | 4 |
Headline results:
| Result | Value |
|---|---|
| Effective depth d | 638 mm |
| Tension steel A_st | 1810 (4·N24) mm² |
| Neutral axis k_u | 0.207 / Under-reinforced (ductile) |
| Tension steel | yielding ✓ |
| Moment capacity φMu | 445.5 (φ 0.85) kNm |
| Design moment M* | 240.0 kNm |
Governing check: Deflection (SLS), total incl. long-term (AS 3600 §8.5.3.1, §8.5.3.2), δ 27.8 mm (short-term 11.6 mm with I_ef 3459×10⁶ mm⁴ = 0.40I_g; + k_cs 2.0 × 0.70 sustained) against L/250 32.0 mm, utilisation 0.87, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Flexure Member works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3600:2018 |
| United States | ACI CODE-318-25 |
| Canada | CSA A23.3-19 |
| Europe | EN 1992-1-1:2004+A1:2014 |
This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam Shear
Reinforced-concrete beam shear to AS 3600 §8.2 - Beam Torsion
Reinforced-concrete beam torsion to AS 3600:2018 Cl. - Column Biaxial
RC column under axial load with biaxial bending to AS 3600 §10.6.3, the P-M interaction is built by strain compatibility about each axis, with reinforcement placed on all four faces (top/bottom bars resist X-axis bending, side bars resist Y-axis bending, both - Column Interaction
Rectangular reinforced-concrete column to AS 3600 §10 - Concrete Durability and Cover
Durability and cover to reinforcement to AS 3600:2018 Section 4 - Concrete Wall
RC wall in compression by the AS 3600 §11.5.3 simplified method - Corbel / Bracket
Reinforced-concrete corbel / bracket to AS 3600 - Crack Control
Crack control for RC beams/slabs by the AS 3600 §8.6.2.2 deemed-to-comply method
Open Flexure Member with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.