Web Bearing design check for AS 4100, AISC 360, CSA S16 and Eurocode 3
Steel web bearing under a concentrated load/reaction to AS 4100 §5.13.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Bearing yield and bearing buckling (web as a column), with the 1:2.5 flange dispersion and the interior/end stiff-bearing condition.
Inputs
Web Bearing takes 5 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Section | ||
| Section type Options: UB; UC; PFC; UBP. | - | UB |
| Section | - | 310UB40.4 |
| Bearing | ||
| Load location Options: Interior (dispersion both sides); End (one side). | - | Interior (dispersion both sides) |
| Stiff bearing length bs | mm | 100 |
| Actions | ||
| Concentrated load / reaction R* | kN | 80 |
Results and report
The module reports: Section; Dispersed bearing bbf; Bearing yield φRby; Web slenderness λn; αc (buckling); Bearing buckling φRbb; Governing φRb.
It checks: Bearing yield; Bearing buckling.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Web Bearing with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Section type | UB |
| Section | 310UB40.4 |
| Load location | Interior (dispersion both sides) |
| Stiff bearing length bs | 100 mm |
| Concentrated load / reaction R* | 80 kN |
Headline results:
| Result | Value |
|---|---|
| Section | 310UB40.4 (UB) |
| Dispersed bearing bbf | 151 mm |
| Bearing yield φRby | 332 kN |
| Web slenderness λn | 131 |
| αc (buckling) | 0.335 |
| Bearing buckling φRbb | 256 kN |
Governing check: Bearing buckling (AS 4100 §5.13.4), R* 80 kN against φRbb 256 kN (αc 0.33), utilisation 0.31, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Web Bearing works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 4100:2020 |
| United States | ANSI/AISC 360-22 |
| Canada | CSA S16-19 |
| Europe | EN 1993-1-1:2005+A1:2014, EN 1990:2002+A1:2005, EN 1993-1-5:2006 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Beam-Column
Steel member under combined axial compression and bending to AS 4100 §8 - Compression Strut
Axially-loaded steel member (strut / column) to AS 4100 - Crane Beam
Overhead-crane runway beam - Floor Beam
Simply-supported steel floor beam to AS 4100 - Load Stiffener
Load-bearing web stiffener to AS 4100 §5.14 - Mullion
Steel wall mullion / wind post to AS 4100 - PFC & Plate
Built-up beam from a PFC (parallel-flange channel) with a welded plate - Portal Frame
Single-bay portal frame to AS 4100
Open Web Bearing with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.