Joint design check for AS 1720.1, AWC NDS, CSA O86 and Eurocode 5
Timber joint (bolted / nailed / screwed) lateral capacity to AS 1720.1 §4.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
The design capacity from the characteristic fastener capacity, the number of fasteners and the modification factors, checked against the design action.
Clauses and parts as listed in the module: CA: CSA O86-19 Cl. 12; EU: EN 1995-1-1 Section 8.
Inputs
Joint takes 9 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Fastener | ||
| Fastener type Options: Bolt; Nail; Screw. | - | Bolt |
| Number of fasteners | - | 4 |
| Char. capacity per fastener Qk | N | 8000 |
| Factors | ||
| Duration factor k1 | - | 0.57 |
| Grain factor k13 | - | 1 |
| Shear-plane factor k14 | - | 1 |
| Geometry factor k16 | - | 1 |
| Multiple-fastener k17 | - | 1 |
| Actions | ||
| Design action N* | kN | 10 |
Results and report
The module reports: Fastener type / number; Char. capacity per fastener; Combined k-factor; Joint capacity N_d,j; Capacity per fastener.
It checks: Joint capacity; Capacity per fastener.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Joint with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Fastener type | Bolt |
| Number of fasteners | 4 |
| Char. capacity per fastener Qk | 8000 N |
| Duration factor k1 | 0.57 |
| Grain factor k13 | 1 |
| Shear-plane factor k14 | 1 |
| Geometry factor k16 | 1 |
| Multiple-fastener k17 | 1 |
Headline results:
| Result | Value |
|---|---|
| Fastener type / number | bolt × 4 |
| Char. capacity per fastener | 8.00 kN |
| Combined k-factor | 0.57 |
| Joint capacity N_d,j | 14.6 kN |
| Capacity per fastener | 3.65 kN |
Governing check: Joint capacity (AS 1720.1 §4), N* 10.0 kN against N_d,j 14.6 kN, utilisation 0.69, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Joint works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 1720.1:2010 |
| United States | ANSI/AWC NDS-2018 |
| Canada | CSA O86-19 |
| Europe | EN 1995-1-1:2004+A2:2014 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Circular Column
Circular timber column / pole to AS 1720.1 §3.3 - F17 Span Tables
Maximum span for an F-grade timber member - Timber Column
Timber column/post to AS 1720.1 §3.3 - Timber Floor Beam
Sawn/LVL timber floor beam to AS 1720.1 - Timber Member
Sawn / glulam rectangular timber member to AS 1720.1 - Timber Roof Beam
Timber roof beam/rafter to AS 1720.1 - Timber Member in Fire
Fire resistance of a timber beam or column to AS 1720.4 by the residual section method
Open Joint with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.