TensorNodeStart free trial
Home / Products / Timber design / Timber Member

Timber Member design check for AS 1720.1, AWC NDS, CSA O86 and Eurocode 5

Sawn / glulam rectangular timber member to AS 1720.1.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

Bending, shear, compression, tension and combined actions, with the k-factor capacity model and slenderness (k12) stability.

Inputs

Timber Member takes 21 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Material
Stress grade Options: F7 KD Pine (validated library); Custom: enter strengths.-Custom: enter strengths
Bending f'bMPa42
Compression f'cMPa34
Tension f'tMPa23.1
Shear f'sMPa3.6
Capacity factor φ-0.85
Section
Depth dmm240
Breadth bmm45
Factors
Load duration k1-0.8
Seasoning k4-1
Temperature k6-1
Strength sharing k9-1
Material const ρb-0.98
Material const ρc-1.083
Restraint factor g13-1
Restraint
Bending restraint Laymm900
Compression length Laxmm3600
Actions
Moment M*kNm4
Shear V*kN2
Compression N*ckN0
Tension N*tkN0

Results and report

The module reports: Grade; Section b × d; Section modulus Z; Bending φMb; Shear φV; Compression φNc; Tension φNt.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Timber Member with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Stress gradeCustom: enter strengths
Bending f'b42 MPa
Compression f'c34 MPa
Tension f't23.1 MPa
Shear f's3.6 MPa
Capacity factor φ0.85
Depth d240 mm
Breadth b45 mm

Headline results:

ResultValue
GradeCustom: enter characteristic strengths
Section b × d45 × 240 mm
Section modulus Z4.32×10⁵ mm³
k12 (bending / comp.)0.867 / 0.426
Bending φMb10.7 kNm
Shear φV17.6 kN

Governing check: Bending (AS 1720.1 §3.2), M* 4.0 kNm against φMb 10.7 kNm, utilisation 0.37, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Timber Member works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS 1720.1:2010
United StatesANSI/AWC NDS-2018
CanadaCSA O86-19
EuropeEN 1995-1-1:2004+A2:2014, EN 1990:2002+A1:2005

This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

All timber design modules

Open Timber Member with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.