Wind Actions calculator for AS/NZS 1170.2, ASCE 7, NBC 2020 and Eurocode 1
Wind Actions is a module of the wind actions group, for Australia and New Zealand, United States, Canada and Europe.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
Site wind speed and design pressures with importance level, design life, roof pitch, average/roof height, blocked-underneath internal pressure and area-reduction Ka.
Inputs
Wind Actions takes 17 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Site | ||
| Wind region (V_R maximum for C and D) Options: A1 to A5 (non-cyclonic); A0 (central Australia, M_z,cat of TC2); B1 (non-cyclonic); B2 (M_c = 1.05); C (cyclonic, M_c = 1.05); D (cyclonic, M_c = 1.05); NZ1 (New Zealand); NZ2 (New Zealand); +2 more. | - | A1 to A5 (non-cyclonic) |
| Sub-region (for M_d, Table 3.2(A)) Options: A1; A2; A3; A4; A5. | - | A1 |
| Importance level Options: IL1 (low consequence); IL2 (normal); IL3 (high); IL4 (post-disaster). | - | IL2 (normal) |
| Design working life Options: 25 years; 50 years; 100 years. | - | 50 years |
| Terrain category Options: TC1 (all over-water surfaces); TC2 (open terrain, scattered obstructions); TC2.5 (open low-vegetation sites); TC3 (suburban housing, numerous obstructions); TC3.5 (interpolated); TC4 (city centres, large dense obstructions). | - | TC2 (open terrain, scattered obstructions) |
| Direction multiplier M_d Options: M_d = 1.0 (any direction, conservative); Table 3.2 for the wind direction; Regions B2, C, D: 0.90 (Table 3.2(A)) for major elements, 1.0 kept for cladding; User value. | - | M_d = 1.0 (any direction, conservative) |
| Topography | ||
| Topography Options: Flat or gently sloping (M_h = 1.0); Hill or ridge; Escarpment. | - | Flat or gently sloping (M_h = 1.0) |
| Shielding | ||
| Shielding Options: None (M_s = 1.0); Upwind buildings (Cl 4.3, structures up to 25 m). | - | None (M_s = 1.0) |
| Building | ||
| Enclosure and openings Options: Enclosed, walls equally permeable; Enclosed, effectively sealed; One wall permeable (windward), others impermeable; One wall permeable (not windward), others impermeable; Two or three walls permeable, windward one permeable; Two or three walls permeable, windward impermeable; Dominant opening in the windward wall; Dominant opening in the leeward wall; +1 more. | - | Enclosed, walls equally permeable |
| Geometry | ||
| Roof form and wind direction Options: Flat or pitch below 10 degrees; Gable, wind normal to the ridge; Hip, wind normal to the ridge; Gable or hip, wind parallel to the ridge; Monoslope, wind on the low edge. | - | Gable, wind normal to the ridge |
| Average roof height h | m | 7.5 |
| Building width normal to the wind b | m | 20 |
| Building depth parallel to the wind d | m | 30 |
| Roof pitch α | ° | 15 |
| Element | ||
| Element designed Options: Major structural element (frames, bracing); Cladding and its immediate supports. | - | Major structural element (frames, bracing) |
| Tributary area A (for K_a) | m² | 60 |
| Combination factor K_c,e (Table 5.5) Options: 1.0 (single surface); 0.9; 0.8 (roof and walls acting together). | - | 0.9 |
Results and report
The module reports: Annual exceedance probability (ULS / SLS); Regional wind speed V_R (ULS / SLS); Multipliers M_c, M_d, M_z,cat, M_s, M_t; Design wind speed V_des (ULS / SLS); Free-stream wind pressure q (ULS / SLS); Internal pressure coefficient C_p,i; Factors K_a, K_c,e, K_l; Governing net pressure, ULS (max / min); Governing net pressure, SLS (max / min); Along-wind force on walls F_x (ULS).
It checks: Along-wind wall force on the building F_x (ULS).
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Wind Actions with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Wind region (V_R maximum for C and D) | A1 to A5 (non-cyclonic) |
| Sub-region (for M_d, Table 3.2(A)) | A1 |
| Importance level | IL2 (normal) |
| Design working life | 50 years |
| Terrain category | TC2 (open terrain, scattered obstructions) |
| Direction multiplier M_d | M_d = 1.0 (any direction, conservative) |
| Topography | Flat or gently sloping (M_h = 1.0) |
| Shielding | None (M_s = 1.0) |
Headline results:
| Result | Value |
|---|---|
| Annual exceedance probability (ULS / SLS) | 1/500 / 1/25 |
| Regional wind speed V_R (ULS / SLS) | 45.0 / 37.3 m/s |
| Multipliers M_c, M_d, M_z,cat, M_s, M_t | 1.000, 1.000, 0.955, 1.000, 1.000 |
| Design wind speed V_des (ULS / SLS) | 43.0 / 35.6 m/s |
| Free-stream wind pressure q (ULS / SLS) | 1.107 / 0.761 kPa |
| Internal pressure coefficient C_p,i | -0.30 or 0.00 |
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Wind Actions works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS/NZS 1170.2:2021 |
| United States | ASCE/SEI 7-22 |
| Canada | NBC 2020 |
| Europe | EN 1991-1-4:2005+A1:2010 |
This module is one of the 21 basic calculators of the Free plan (one code system, reports carry an Evaluation mark), and it opens fully during the 7-day trial. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Flag
Wind drag on a flag/banner and pole base moment - Free Roof / Canopy
Net wind pressure and uplift on a free/canopy roof - Hoarding
Solid hoarding / freestanding wall - Monoslope Roof
Wind pressures on a monoslope (skillion) roof to AS 1170.2 §5.4 - Purlin & Girt Loads
Purlin/girt member under wind to AS 4100 - Terrain Change
Wind terrain/height multiplier with a terrain-category change to AS 1170.2 §4.2
Open Wind Actions with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.