Bondbeam design check for AS 3700, TMS 402, CSA S304 and Eurocode 6
Reinforced masonry bond beam / lintel to AS 3700.
Create a free account to use it
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.
What it checks
The span moment and shear from the applied load, the reinforced flexural capacity, the masonry shear capacity and the minimum reinforcement.
Inputs
Bondbeam takes 8 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.
| Input | Unit | Default |
|---|---|---|
| Geometry | ||
| Clear span | m | 2 |
| Beam depth | mm | 200 |
| Width bw | mm | 190 |
| Cover | mm | 30 |
| Reinforcement | ||
| Reinforcement Options: 1-N12 (113); 2-N12 (226); 2-N16 (400); 2-N20 (620). | - | 2-N12 (226) |
| Material | ||
| Steel fsy | MPa | 500 |
| Masonry f'm | MPa | 12 |
| Actions | ||
| Design load w | kN/m | 10 |
Results and report
The module reports: Effective depth d; Moment / shear; Flexural capacity φMu; Shear capacity Vu; Min reinforcement.
It checks: Flexural capacity; Shear capacity; Minimum reinforcement.
Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.
Example with the default inputs
Bondbeam with its default inputs for the Australia and New Zealand code system. The main inputs:
| Input | Value |
|---|---|
| Clear span | 2 m |
| Beam depth | 200 mm |
| Width bw | 190 mm |
| Cover | 30 mm |
| Reinforcement | 2-N12 (226) |
| Steel fsy | 500 MPa |
| Masonry f'm | 12 MPa |
| Design load w | 10 kN/m |
Headline results:
| Result | Value |
|---|---|
| Effective depth d | 164 mm |
| Moment / shear | 5.0 / 10.0 kNm, kN |
| Flexural capacity φMu | 12.0 kNm |
| Shear capacity Vu | 11.1 kN |
| Min reinforcement | 49 mm² |
Governing check: Shear capacity (AS 3700 §8.8 (Eq. 8.8)), V* 10.0 kN against φVu 11.1 kN, utilisation 0.90, passes.
Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.
Design codes
Bondbeam works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.
| Region | Standard and edition |
|---|---|
| Australia and New Zealand | AS 3700:2018 |
| United States | TMS 402-22 |
| Canada | CSA S304-14 |
| Europe | EN 1996-1-1:2005+A1:2012 |
Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.
Related modules
- Masonry Member
Unreinforced masonry wall/member in vertical compression to AS 3700 - Masonry Pier
Masonry pier in compression to AS 3700 - Sleeper Wall
Sleeper wall - T / Angle Lintel
Steel lintel (angle, PFC or flat) over a masonry opening
Open Bondbeam with a free account
7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.