TensorNodeStart free trial
Home / Features / Steel section FEA

Steel member checks with a finite element stress analysis of the section

The code check gives the design capacity. The section stress view shows how the section carries the actions: the shear flowing round the flanges and web, the torsion stresses and where the von Mises stress peaks. TensorNode shows both in its steel member modules.

The von Mises stress over a meshed 360UB56.7 cross-section, with the root fillets modelled and the peak stress points marked

The member check

Section moment, member moment with lateral-torsional buckling, shear and section compression, to AS 4100, AISC 360, CSA S16 or Eurocode 3. Example with the default inputs (AS 4100): a 360UB56.7 in Grade 300 over 8 m with restraints at 2 m, αm = 1.13 and w* = 20 kN/m gives M* = 160 kNm, φMs = 272.7 kNm and φMbx = 269.4 kNm. Member moment governs at a utilisation of 0.59.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

A finite element mesh of the cross-section

Steel is not modelled with fibre laws. The cross-section itself is meshed with four-node plane elements, root fillets included, and the mesh solves the Saint-Venant warping function for torsion and the flexure-shear functions for shear through the shear centre. The shear stress therefore flows round the flanges and web as it does in the steel. The normal stress from N and M is added at each point and the von Mises stress is formed (Pilkey, Analysis and Design of Elastic Beams, 2002, chapter 6):

σvm=σz2+3(τzx2+τzy2)\sigma_{vm} = \sqrt{\sigma_z^2 + 3\left(\tau_{zx}^2 + \tau_{zy}^2\right)}

Sections covered: I, channel, angle, tee, box, CHS and EHS.

Checked against hand formulas

The section solver is checked against closed-form results: shear stress against the elastic formula, torsion of rectangles and tubes, and the stress concentration at a hole. A section check runs over every section family and size in TensorNode and compares the mesh, the area, the normal stress and the shear flow at the check points with the hand formulas.

τ=VQIt\tau = \frac{VQ}{It}

From the 3D model

Steel members of an FEA model are sent to Steel Member, Beam-Column, Steel Column or Tension Member with their analysed actions, designed for the envelope of the combinations and coloured by utilisation in the model view.

What it is and what it is not

The section view gives elastic stresses at the design actions. The design capacity, with resistance factors, section classification and lateral-torsional buckling, comes from the code check of the module, not from the mesh.

Related modules

  • Steel Member
    Hot-rolled steel member (UB / UC / PFC / TFB) to AS 4100
  • Beam-Column
    Steel member under combined axial compression and bending to AS 4100 §8
  • Steel Column
    Axially-loaded steel column to AS 4100 §6
  • Compression Strut
    Axially-loaded steel member (strut / column) to AS 4100

More

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.