TensorNodeStart free trial
Home / Products / Drainage / Rainfall Intensity (ARI)

Rainfall Intensity (ARI) calculator for AS/NZS 3500.3, ASCE 7, NBC 2020 and EN 12056-3

Rainfall Intensity (ARI) is a module of the drainage group, for Australia and New Zealand, United States, Canada and Europe.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

Design rainfall intensity for a chosen average recurrence interval (ARI) and storm duration from the site IFD coefficients, with the equivalent AEP and an optional Rational-Method peak flow.

Inputs

Rainfall Intensity (ARI) takes 7 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Frequency
Average recurrence intervalyears10
Storm
Storm duration tcmin30
IFD (BoM)
IFD coefficient a-745
IFD exponent b-0.65
Reference ARIyears10
Rational
Catchment area (opt.)ha0
Runoff coeff. C-0.9

Results and report

The module reports: Intensity at ref. ARI; Frequency factor; Design intensity i; Equivalent AEP.

It checks: Rainfall intensity i; Equivalent AEP.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Rainfall Intensity (ARI) with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Average recurrence interval10 years
Storm duration tc30 min
IFD coefficient a745
IFD exponent b0.65
Reference ARI10 years
Catchment area (opt.)0 ha
Runoff coeff. C0.9

Headline results:

ResultValue
Intensity at ref. ARI81.7 mm/hr
Frequency factor1.000
Design intensity i81.7 mm/hr
Equivalent AEP9.5 %

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Rainfall Intensity (ARI) works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS/NZS 3500.3
United StatesNOAA Atlas 14, IPC 2018, ASCE/SEI 7-22
CanadaNBC 2020, NPC 2020
EuropeEN 12056-3, EN 752

Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

All modules

Open Rainfall Intensity (ARI) with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.