TensorNodeStart free trial
Home / Products / Drainage / Rainfall Intensity (AEP)

Rainfall Intensity (AEP) calculator for AS/NZS 3500.3, ASCE 7, NBC 2020 and EN 12056-3

Design rainfall intensity expressed in the modern annual-exceedance-probability (AEP) frequency descriptor.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

Converts the AEP to an equivalent ARI and returns the IFD intensity and optional peak flow.

Inputs

Rainfall Intensity (AEP) takes 7 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Frequency
Annual exceedance probability%10
Storm
Storm duration tcmin30
IFD (BoM)
IFD coefficient a-745
IFD exponent b-0.65
Reference ARIyears10
Rational
Catchment area (opt.)ha0
Runoff coeff. C-0.9

Results and report

The module reports: Equivalent ARI; Base intensity (ref.); Design intensity i; Equivalent AEP.

It checks: Rainfall intensity i; Equivalent AEP.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Rainfall Intensity (AEP) with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Annual exceedance probability10 %
Storm duration tc30 min
IFD coefficient a745
IFD exponent b0.65
Reference ARI10 years
Catchment area (opt.)0 ha
Runoff coeff. C0.9

Headline results:

ResultValue
Equivalent ARI9.5 years
Base intensity (ref.)81.7 mm/hr
Design intensity i80.8 mm/hr
Equivalent AEP10.0 %

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Rainfall Intensity (AEP) works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandARR 2019, AS/NZS 3500.3
United StatesNOAA Atlas 14, IPC 2018, ASCE/SEI 7-22
CanadaNBC 2020, NPC 2020
EuropeEN 12056-3, EN 752

Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

  • Drainage
    Pipe / drain capacity by the Manning equation
  • Rainfall Intensity (ARI)
    Design rainfall intensity for a chosen average recurrence interval (ARI) and storm duration from the site IFD coefficients, with the equivalent AEP and an optional Rational-Method peak flow.
  • Stormwater Detention
    On-site stormwater detention (OSD)

All modules

Open Rainfall Intensity (AEP) with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.