TensorNodeStart free trial
Home / Products / Drainage / Drainage

Drainage calculator for AS/NZS 3500.3, ASCE 7, NPC 2020 and EN 12056-3

Pipe / drain capacity by the Manning equation.

Create a free account to use it

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.

What it checks

The full-bore velocity and flow capacity for a circular pipe at a given grade and roughness, with a self-cleansing-velocity check and an optional capacity-versus-demand check.

Inputs

Drainage takes 4 inputs for the Australia and New Zealand code system, with the defaults below. Lengths are in m, forces in kN and stresses in MPa unless the unit column says otherwise.

InputUnitDefault
Pipe
Pipe diameter (internal)mm225
Pipe grade%1
Manning's n-0.013
Demand
Design flow Q* (opt.)L/s30

Results and report

The module reports: Full-bore velocity; Full-bore capacity; Hydraulic radius R; Capacity vs demand; Self-cleansing.

It checks: Full-bore velocity; Full-bore capacity; Capacity vs demand.

Each module produces a report: numbered working, formulas with substituted values, tables and diagrams, ready to attach to a calculation package. The report carries a verification code that confirms it was made by TensorNode and has not been changed.

Example with the default inputs

Drainage with its default inputs for the Australia and New Zealand code system. The main inputs:

InputValue
Pipe diameter (internal)225 mm
Pipe grade1 %
Manning's n0.013
Design flow Q* (opt.)30 L/s

Headline results:

ResultValue
Full-bore velocity1.13 m/s
Full-bore capacity44.9 L/s
Hydraulic radius R56 mm
Capacity vs demand30.0 / 44.9 L/s
Self-cleansingOK (≥ 0.6 m/s)

Governing check: Capacity vs demand (AS 3500.3), Q* 30.0 L/s against 44.9 L/s, utilisation 0.67, passes.

Computed by TensorNode with the default inputs shown; a qualified engineer checks every result.

Design codes

Drainage works to 4 code systems in Australia and New Zealand, United States, Canada and Europe. The standards and editions are listed below; clause numbers are cited in the report.

RegionStandard and edition
Australia and New ZealandAS/NZS 3500.3
United StatesIPC 2018, ASCE/SEI 7-22
CanadaNPC 2020, NBC 2020
EuropeEN 12056-3, EN 752

Use it in full during the 7-day trial of the Professional plan. Paid plans give access to the module packs. TensorNode is a calculation aid. Every result must be checked and accepted by a qualified engineer, who remains responsible for the design. Read the scope and limits of this module before you rely on a result.

Related modules

  • Rainfall Intensity (AEP)
    Design rainfall intensity expressed in the modern annual-exceedance-probability (AEP) frequency descriptor
  • Rainfall Intensity (ARI)
    Design rainfall intensity for a chosen average recurrence interval (ARI) and storm duration from the site IFD coefficients, with the equivalent AEP and an optional Rational-Method peak flow.
  • Stormwater Detention
    On-site stormwater detention (OSD)

All modules

Open Drainage with a free account

7 days of the Professional plan, no card. After the trial the account moves to the Free plan; nothing is charged automatically.